Ophthalmic Biophysics, L V Prasad Eye Institute, Hyderabad, India; Brien Holden Vision Institute Limited, Sydney, Australia.
Ophthalmic Biophysics, L V Prasad Eye Institute, Hyderabad, India.
Exp Eye Res. 2021 Apr;205:108481. doi: 10.1016/j.exer.2021.108481. Epub 2021 Feb 3.
There have been many studies on lens properties in specific populations (e.g. in China, Europe, Singapore, etc.) some of which suggest there may be differences between populations. Differences could be caused by ethnic or environmental influences or experimental procedures. The purpose of this study is to evaluate if any differences exist between Indian and European populations in the central geometric and full shape properties of human lenses. Two custom-developed spectral domain optical coherence tomography systems were used to acquire the crystalline lens geometry: one in India (69 lenses from 59 donors) and the other in Spain (24 lenses from 19 donors). The steps for obtaining accurate 3-D models from optical coherence tomography raw images comprised of image segmentation, fan and optical distortion correction, tilt removal and registration. The outcome variables were lens equatorial diameter, lens thickness, anterior and posterior lens thicknesses and their ratio, central radius of curvature of the anterior and posterior lens surfaces, lens volume and lens surface area. A mixed effects model by maximum likelihood estimation was used to evaluate the effect of age, population and their interaction (age*population) on lens parameters. After adjusting for age, there were no population differences observed in anterior and posterior radii of curvature, equatorial diameter, lens thickness, anterior and posterior lens thicknesses and their ratio, volume and surface area (all p ≥ 0.08). There was also no effect of the interaction term on anterior and posterior radii of curvature, equatorial diameter, lens thickness, anterior and posterior lens thicknesses and their ratio, volume and surface area (all p ≥ 0.06). All central geometric and full shape parameters appeared to be comparable between the European and Indian populations. This is the first study to compare geometric and full shape lens parameters between different populations in vitro.
已经有许多关于特定人群(例如中国、欧洲、新加坡等)晶状体特性的研究,其中一些研究表明人群之间可能存在差异。差异可能是由种族或环境影响或实验程序引起的。本研究旨在评估印度和欧洲人群的中央几何和全形晶状体参数是否存在差异。两个定制的谱域光学相干断层扫描系统用于获取晶状体几何形状:一个在印度(59 名供体中的 69 个晶状体),另一个在西班牙(19 名供体中的 24 个晶状体)。从光学相干断层扫描原始图像获得准确的 3D 模型的步骤包括图像分割、扇形和光学失真校正、倾斜去除和配准。结果变量为晶状体赤道直径、晶状体厚度、前晶状体厚度和后晶状体厚度及其比值、前晶状体和后晶状体表面的中央曲率半径、晶状体体积和晶状体表面积。使用最大似然估计的混合效应模型评估年龄、人群及其相互作用(年龄*人群)对晶状体参数的影响。在调整年龄后,在前、后曲率半径、赤道直径、晶状体厚度、前、后晶状体厚度及其比值、体积和表面积方面,人群之间没有差异(均 p≥0.08)。在前、后曲率半径、赤道直径、晶状体厚度、前、后晶状体厚度及其比值、体积和表面积方面,交互项也没有影响(均 p≥0.06)。所有中央几何和全形参数在欧洲和印度人群之间似乎都是可比的。这是首次在体外比较不同人群的晶状体几何和全形参数。