Faculty of Science and Technology, Norwegian University of Life Sciences, Postbox 5003, 1432, Ås, Norway.
Faculty of Chemistry, Biotechnology and Food Science, Norwegian University of Life Sciences, P.O. Box 5003, 1432, Ås, Norway.
Microb Cell Fact. 2021 Mar 3;20(1):59. doi: 10.1186/s12934-021-01542-1.
Oleaginous filamentous fungi can accumulate large amount of cellular lipids and potentially serve as a major source of oleochemicals for food, feed, chemical, pharmaceutical, and transport industries. Transesterification of microbial oils is an essential step in microbial lipid production at both laboratory and industrial scale. Direct transesterification can considerably reduce costs, increase sample throughput and improve lipid yields (in particular fatty acid methyl esters, FAMEs). There is a need for the assessment of the direct transesterification methods on a biomass of filamentous fungi due to their unique properties, specifically resilient cell wall and wide range of lipid content and composition. In this study we have evaluated and optimised three common direct transesterification methods and assessed their suitability for processing of fungal biomass.
The methods, based on hydrochloric acid (Lewis method), sulphuric acid (Wahlen method), and acetyl chloride (Lepage method), were evaluated on six different strains of Mucoromycota fungi by using different internal standards for gas chromatography measurements. Moreover, Fourier transform infrared (FTIR) spectroscopy was used for the detection of residual lipids in the biomass after the transesterification reaction/extraction, while transesterification efficiency was evaluated by nuclear magnetic resonance spectroscopy. The results show that the majority of lipids, in particular triglycerides, were extracted for all methods, though several methods had substandard transesterification yields. Lewis method, optimised with respect to solvent to co-solvent ratio and reaction time, as well as Lepage method, offer precise estimate of FAME-based lipids in fungal biomass.
The results show that Lepage and Lewis methods are suitable for lipid analysis of oleaginous filamentous fungi. The significant difference in lipid yields results, obtained by optimised and standard Lewis methods, indicates that some of the previously reported lipid yields for oleaginous filamentous fungi must be corrected upwards. The study demonstrates value of biomass monitoring by FTIR, importance of optimal solvent to co-solvent ratio, as well as careful selection and implementation of internal standards for gas chromatography.
产油丝状真菌可以积累大量细胞脂质,并且可能成为食品、饲料、化学、制药和运输行业中油脂化学品的主要来源。在实验室和工业规模上,微生物油脂的酯交换是微生物油脂生产的一个重要步骤。直接酯交换可以显著降低成本、增加样品通量并提高油脂产率(特别是脂肪酸甲酯,FAMEs)。由于其独特的特性,特别是坚韧的细胞壁以及广泛的脂质含量和组成,需要对丝状真菌生物质的直接酯交换方法进行评估。在这项研究中,我们评估和优化了三种常见的直接酯交换方法,并评估了它们对真菌生物质处理的适用性。
该方法基于盐酸(Lewis 法)、硫酸(Wahlen 法)和乙酰氯(Lepage 法),通过使用不同的内标物进行气相色谱测量,对六种不同的 Mucoromycota 真菌菌株进行了评估。此外,傅里叶变换红外(FTIR)光谱用于检测酯交换反应/提取后生物质中的残留脂质,而通过核磁共振波谱法评估酯交换效率。结果表明,虽然几种方法的酯交换产率不高,但所有方法都提取了大部分脂质,特别是甘油三酯。Lewis 法在溶剂与共溶剂的比例和反应时间方面进行了优化,以及 Lepage 法,为真菌生物质中基于 FAME 的脂质提供了精确的估计。
结果表明,Lepage 和 Lewis 方法适用于产油丝状真菌的脂质分析。通过优化和标准 Lewis 方法获得的脂质产率的显著差异表明,以前报道的某些产油丝状真菌的脂质产率必须向上修正。该研究证明了 FTIR 用于生物质监测的价值、优化溶剂与共溶剂比例的重要性,以及气相色谱内标物的仔细选择和实施的重要性。