Suppr超能文献

使用微计算机断层扫描和深度学习对兔膝关节钙化软骨形态进行自动化分析。

Automated analysis of rabbit knee calcified cartilage morphology using micro-computed tomography and deep learning.

机构信息

Research Unit of Medical Imaging, Physics and Technology, University of Oulu, Oulu, Finland.

Department of Applied Physics, University of Eastern Finland, Kuopio, Finland.

出版信息

J Anat. 2021 Aug;239(2):251-263. doi: 10.1111/joa.13435. Epub 2021 Mar 29.

Abstract

Structural dynamics of calcified cartilage (CC) are poorly understood. Conventionally, CC structure is analyzed using histological sections. Micro-computed tomography (µCT) allows for three-dimensional (3D) imaging of mineralized tissues; however, the segmentation between bone and mineralized cartilage is challenging. Here, we present state-of-the-art deep learning segmentation for µCT images to assess 3D CC morphology. The sample includes 16 knees from 12 New Zealand White rabbits dissected into osteochondral samples from six anatomical regions: lateral and medial femoral condyles, lateral and medial tibial plateaus, femoral groove, and patella (n = 96). The samples were imaged with µCT and processed for conventional histology. Manually segmented CC from the images was used to train segmentation models with different encoder-decoder architectures. The models with the greatest out-of-fold evaluation Dice score were selected. CC thickness was compared across 24 regions, co-registered between the imaging modalities using Pearson correlation and Bland-Altman analyses. Finally, the anatomical CC thickness variation was assessed via a Linear Mixed Model analysis. The best segmentation models yielded average Dice of 0.891 and 0.807 for histology and µCT segmentation, respectively. The correlation between the co-registered regions was strong (r = 0.897, bias = 21.9 µm, standard deviation = 21.5 µm). Finally, both methods could separate the CC thickness between the patella, femoral, and tibial regions (p < 0.001). As a conclusion, the proposed µCT analysis allows for ex vivo 3D assessment of CC morphology. We demonstrated the biomedical relevance of the method by quantifying CC thickness in different anatomical regions with a varying mean thickness. CC was thickest in the patella and thinnest in the tibial plateau. Our method is relatively straightforward to implement into standard µCT analysis pipelines, allowing the analysis of CC morphology. In future research, µCT imaging might be preferable to histology, especially when analyzing dynamic changes in cartilage mineralization. It could also provide further understanding of 3D morphological changes that may occur in mineralized cartilage, such as thickening of the subchondral plate in osteoarthritis and other joint diseases.

摘要

钙化软骨 (CC) 的结构动力学尚不清楚。传统上,使用组织学切片分析 CC 结构。微计算机断层扫描 (µCT) 允许对矿化组织进行三维 (3D) 成像;然而,骨与矿化软骨之间的分割具有挑战性。在这里,我们提出了用于 µCT 图像的最先进的深度学习分割方法,以评估 3D CC 形态。该样本包括 12 只新西兰白兔的 16 个膝关节,从六个解剖区域分离出骨软骨样本:外侧和内侧股骨髁、外侧和内侧胫骨平台、股骨沟和髌骨(n=96)。对样本进行 µCT 成像,并进行常规组织学处理。使用手动分割的 CC 从图像中训练具有不同编码器-解码器架构的分割模型。选择具有最大折外评估 Dice 得分的模型。使用 Pearson 相关性和 Bland-Altman 分析将两种成像方式配准后的 CC 厚度进行比较。最后,通过线性混合模型分析评估解剖 CC 厚度变化。最佳分割模型在组织学和 µCT 分割中的平均 Dice 分别为 0.891 和 0.807。配准区域之间的相关性很强(r=0.897,偏差=21.9 µm,标准差=21.5 µm)。最后,两种方法都可以区分髌骨、股骨和胫骨区域之间的 CC 厚度(p<0.001)。总之,提出的 µCT 分析允许对 CC 形态进行离体 3D 评估。我们通过在不同解剖区域定量 CC 厚度来证明该方法的生物医学相关性,这些区域的平均厚度不同。CC 在髌骨中最厚,在胫骨平台中最薄。我们的方法相对简单,可以直接应用于标准的 µCT 分析管道,从而可以分析 CC 形态。在未来的研究中,µCT 成像可能比组织学更有优势,尤其是在分析软骨矿化的动态变化时。它还可以进一步了解矿化软骨中可能发生的 3D 形态变化,例如骨关节炎和其他关节疾病中软骨下板的增厚。

https://cdn.ncbi.nlm.nih.gov/pmc/blobs/909e/8273618/527134210191/JOA-239-251-g007.jpg

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验