Suppr超能文献

深度学习助力冠状动脉 CT 血管造影术检测阻塞性冠状动脉疾病:读者经验、钙化和图像质量的影响。

Deep learning powered coronary CT angiography for detecting obstructive coronary artery disease: The effect of reader experience, calcification and image quality.

机构信息

Department of Diagnostic Radiology, Jinling Hospital, Medical School of Nanjing University, Nanjing, Jiangsu 210002, PR China.

Department of Cardiology, Jinling Hospital, Medical School of Nanjing University, Nanjing, Jiangsu 210002, PR China.

出版信息

Eur J Radiol. 2021 Sep;142:109835. doi: 10.1016/j.ejrad.2021.109835. Epub 2021 Jun 27.

Abstract

OBJECTIVES

To investigate the effect of reader experience, calcification and image quality on the performance of deep learning (DL) powered coronary CT angiography (CCTA) in automatically detecting obstructive coronary artery disease (CAD) with invasive coronary angiography (ICA) as reference standard.

METHODS

A total of 165 patients (680 vessels and 1505 segments) were included in this study. Three sessions were performed in order: (1) The artificial intelligence (AI) software automatically processed CCTA images, stenosis degree and processing time were recorded for each case; (2) Six cardiovascular radiologists with different experiences (low/ intermediate/ high experience) independently performed image post-processing and interpretation of CCTA, (3) AI + human reading was performed. Luminal stenosis ≥50% was defined as obstructive CAD in ICA and CCTA. Diagnostic performances of AI, human reading and AI + human reading were evaluated and compared on a per-patient, per-vessel and per-segment basis with ICA as reference standard. The effects of calcification and image quality on the diagnostic performance were also studied.

RESULTS

The average post-processing and interpretation times of AI was 2.3 ± 0.6 min per case, reduced by 76%, 72%, 69% compared with low/ intermediate/ high experience readers (all P < 0.001), respectively. On a per-patient, per-vessel and per-segment basis, with ICA as reference method, the AI overall diagnostic sensitivity for detecting obstructive CAD were 90.5%, 81.4%, 72.9%, the specificity was 82.3%, 93.9%, 95.0%, with the corresponding areas under the curve (AUCs) of 0.90, 0.90, 0.87, respectively. Compared to human readers, the diagnostic performance of AI was higher than that of low experience readers (all P < 0.001). The diagnostic performance of AI + human reading was higher than human reading alone, and AI + human readers' ability to correctly reclassify obstructive CAD was also improved, especially for low experience readers (Per-patient, the net reclassification improvement (NRI) = 0.085; per-vessel, NRI = 0.070; and per-segment, NRI = 0.068, all P < 0.001). The diagnostic performance of AI was not significantly affected by calcification and image quality (all P > 0.05).

CONCLUSIONS

AI can substantially shorten the post-processing time, while AI + human reading model can significantly improve the diagnostic performance compared with human readers, especially for inexperienced readers, regardless of calcification severity and image quality.

摘要

目的

以有创冠状动脉造影(ICA)为参考标准,探讨读者经验、钙化和图像质量对深度学习(DL)驱动的冠状动脉 CT 血管造影(CCTA)自动检测阻塞性冠状动脉疾病(CAD)的性能的影响。

方法

本研究共纳入 165 例患者(680 支血管和 1505 节段)。共进行了三个阶段:(1)人工智能(AI)软件自动处理 CCTA 图像,记录每个病例的狭窄程度和处理时间;(2)六名经验不同(低/中/高经验)的心血管放射科医生独立进行 CCTA 的图像后处理和解读;(3)进行 AI+人工阅读。ICA 和 CCTA 中管腔狭窄≥50%定义为阻塞性 CAD。以 ICA 为参考标准,评估和比较 AI、人工阅读和 AI+人工阅读的患者、血管和节段的诊断性能。还研究了钙化和图像质量对诊断性能的影响。

结果

AI 的平均后处理和解释时间为每个病例 2.3±0.6 分钟,与低/中/高经验读者相比分别减少了 76%、72%和 69%(均 P<0.001)。以 ICA 为参考方法,基于患者、血管和节段,AI 整体诊断 CAD 的敏感性分别为 90.5%、81.4%和 72.9%,特异性分别为 82.3%、93.9%和 95.0%,相应的曲线下面积(AUC)分别为 0.90、0.90 和 0.87。与人工读者相比,AI 的诊断性能高于低经验读者(均 P<0.001)。AI+人工阅读的诊断性能高于人工阅读,AI+人工读者正确重新分类阻塞性 CAD 的能力也得到提高,尤其是低经验读者(基于患者,净重新分类改善(NRI)=0.085;基于血管,NRI=0.070;基于节段,NRI=0.068,均 P<0.001)。AI 的诊断性能不受钙化和图像质量的显著影响(均 P>0.05)。

结论

AI 可以大大缩短后处理时间,而 AI+人工阅读模型可以显著提高诊断性能,与人工读者相比,尤其是与经验不足的读者相比,无论钙化严重程度和图像质量如何,诊断性能均有显著提高。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验