Department of Physics and Technology, Universitetet i Tromsø (UiT) The Arctic University of Norway, 9037 Tromsø, Norway.
Bio-photonics and Green Photonics Laboratory, Department of Physics, Indian Institute of Technology Delhi, New Delhi 110016, India.
Proc Natl Acad Sci U S A. 2021 Nov 23;118(47). doi: 10.1073/pnas.2115323118.
Visualization of three-dimensional (3D) morphological changes in the subcellular structures of a biological specimen is a major challenge in life science. Here, we present an integrated chip-based optical nanoscopy combined with quantitative phase microscopy (QPM) to obtain 3D morphology of liver sinusoidal endothelial cells (LSEC). LSEC have unique morphology with small nanopores (50-300 nm in diameter) in the plasma membrane, called fenestrations. The fenestrations are grouped in discrete clusters, which are around 100 to 200 nm thick. Thus, imaging and quantification of fenestrations and sieve plate thickness require resolution and sensitivity of sub-100 nm along both the lateral and the axial directions, respectively. In chip-based nanoscopy, the optical waveguides are used both for hosting and illuminating the sample. The fluorescence signal is captured by an upright microscope, which is converted into a Linnik-type interferometer to sequentially acquire both superresolved images and phase information of the sample. The multimodal microscope provided an estimate of the fenestration diameter of 119 ± 53 nm and average thickness of the sieve plates of 136.6 ± 42.4 nm, assuming the constant refractive index of cell membrane to be 1.38. Further, LSEC were treated with cytochalasin B to demonstrate the possibility of precise detection in the cell height. The mean phase value of the fenestrated area in normal and treated cells was found to be 161 ± 50 mrad and 109 ± 49 mrad, respectively. The proposed multimodal technique offers nanoscale visualization of both the lateral size and the thickness map, which would be of broader interest in the fields of cell biology and bioimaging.
生物样本亚细胞结构的三维(3D)形态变化的可视化是生命科学的主要挑战。在这里,我们提出了一种基于芯片的集成光学纳米显微镜与定量相位显微镜(QPM)相结合的方法,以获得肝窦内皮细胞(LSEC)的 3D 形态。LSEC 具有独特的形态,其质膜上有小孔(直径 50-300nm),称为窗孔。窗孔以离散的簇状聚集在一起,厚度约为 100-200nm。因此,窗孔和筛板厚度的成像和定量需要在侧向和轴向方向上分别具有亚 100nm 的分辨率和灵敏度。在基于芯片的纳米显微镜中,光波导既用于容纳和照明样品。荧光信号由直立显微镜捕获,该显微镜转换为林尼克型干涉仪,以顺序获取样品的超分辨图像和相位信息。多模态显微镜提供了 119±53nm 的窗孔直径估计值和 136.6±42.4nm 的筛板平均厚度,假设细胞膜的恒定折射率为 1.38。此外,用细胞松弛素 B 处理 LSEC 以证明在细胞高度上进行精确检测的可能性。正常和处理细胞的窗孔区域的平均相位值分别为 161±50mrad 和 109±49mrad。所提出的多模态技术提供了横向尺寸和厚度图的纳米级可视化,这将在细胞生物学和生物成像领域引起更广泛的兴趣。