Numerical Simulation of a Time-Dependent Electroviscous and Hybrid Nanofluid with Darcy-Forchheimer Effect between Squeezing Plates.

In this article, the behavior of transient electroviscous fluid flow is investigated through squeezing plates containing hybrid nanoparticles. A hybrid nanofluid MoS2+Au/C2H6O2-H2O was formulated by dissolving the components of an inorganic substance such as molybdenum disulfide (MoS2) and gold (Au) in a base fluid of ethylene glycol/water. This hybrid non-liquid flow was modeled by various nonlinear mathematical fluid flow models and subsequently solved by numerical as well as analytical methods. For the numerical solution of nonlinear ODEs, a built-in function BVP4C was used in MATLAB, and the same problem was solved in MATHEMATICA by HAM. The result of the present problem related to the results obtained from the existing literature under certain conditions. The outcomes revealed that the concentration profiles were more sensitive to homogeneity diversity parameters. The simulation of the various physical parameters of the model indicated that the heat transfer through a mixture of hybrid nanofluids was greater than a simple nanofluid. In addition, the phenomenon of mixed convection was considered to improve the velocity of simple nanofluids and hybrid nanofluids, when both cases have low permeability. A rise in the volume fraction of the nanomaterials, Φ, was associated with an increase in the heat transfer rate. It was observed that the heat transfer rate of the hybrid nanofluids MoS2+Au/C2H6O2-H2O was higher than that of the single nanofluids MoS2/C2H6O2-H2O.