Suppr超能文献

在 REACH 法规新要求的框架内定量测定纹身和永久性化妆油墨中的防腐剂。

Quantification of preservatives in tattoo and permanent make-up inks in the frame of the new requirements under the REACH Regulation.

机构信息

National Centre for Chemicals, Cosmetics and Consumer Health Protection, Istituto Superiore di Sanità, Rome, Italy.

出版信息

Contact Dermatitis. 2022 Sep;87(3):233-240. doi: 10.1111/cod.14105. Epub 2022 Apr 13.

Abstract

BACKGROUND

According to the REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals) restriction, tattoo and permanent make-up (PMU) inks placed on the European Union market after January 4, 2022, shall not contain methylisothiazolinone, benzisothiazolinone (BIT), octylisothiazolinone (OIT), or other skin sensitizers in concentrations of 10 mg/kg or higher and phenoxyethanol (PE) or other eye irritants or damaging substances in concentrations of 100 mg/kg or higher. In addition, preservatives and other substances enlisted in Annex II to Cosmetic Product Regulation shall not be present in concentrations of 0.5 mg/kg or higher.

OBJECTIVES

This study aims to quantify 14 preservatives in 99 tattoo and 39 PMU inks from the Italian market and presents a comparison with concentration limits set by the REACH restriction.

METHODS

Inks were analysed by applying validated analytical methods based on liquid chromatography techniques.

RESULTS

About 24.0%, 15.2% and 1.5% of the overall samples contained BIT, PE and OIT, respectively, at concentrations exceeding REACH concentration limits. The number of noncompliant tattoo inks (49.5%) would be significantly greater than that of the PMU inks (17.9%).

CONCLUSIONS

About 40.6% of the samples would be noncompliant with the restriction for the presence of preservatives above the permitted level. Additional concentration limits will apply to skin sensitizing preservatives for proper labelling of inks under CLP (Classification, Labelling and Packaging) Regulation.

摘要

背景

根据 REACH(化学品注册、评估、授权和限制)法规的限制,2022 年 1 月 4 日后投放于欧盟市场的纹身和永久性化妆(PMU)墨水不得含有浓度为 10 毫克/千克或以上的甲基异噻唑啉酮、苯并异噻唑啉酮(BIT)、辛基异噻唑啉酮(OIT)或其他皮肤致敏剂,以及浓度为 100 毫克/千克或以上的苯氧乙醇(PE)或其他眼刺激物或损伤物质。此外,在化妆品法规附件 II 中列出的防腐剂和其他物质不得存在于浓度为 0.5 毫克/千克或以上的物质中。

目的

本研究旨在定量分析 99 种纹身墨水中的 14 种防腐剂和 39 种 PMU 墨水中的防腐剂,并与 REACH 限制规定的浓度限值进行比较。

方法

采用经验证的基于液相色谱技术的分析方法对墨水进行分析。

结果

约 24.0%、15.2%和 1.5%的总样本分别含有 BIT、PE 和 OIT,其浓度超过 REACH 浓度限值。不合格的纹身墨水量(49.5%)将显著高于 PMU 墨水量(17.9%)。

结论

约 40.6%的样本将因存在超过允许水平的防腐剂而不符合限制要求。对于 CLP(分类、标签和包装)法规下的墨水,根据皮肤致敏防腐剂的规定,还将适用额外的浓度限值。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验