Enhanced antibacterial properties of biocompatible titanium electrochemically deposited Ag/TiO nanotubes and chitosan-gelatin-Ag-ZnO complex coating.

A novel double-layered antibacterial coating was fabricated on pure titanium (Ti) a simple three-step electrodeposition process. Scanning electronic microscopy (SEM) images show that the coating was constructed with the inner layer of TiO nanotubes doped with silver nanoparticles (TNTs/Ag) and the outer layer of chitosan-gelatin mixture with zinc oxide and silver nanoparticles (CS-Gel-Ag-ZnO). In comparison, we also investigated the composition, structure and antibacterial properties of pure Ti coated with TNTs, TNTs/Ag or TNTs/Ag + CS-Gel-Ag-ZnO, respectively. The TNTs was about 100 nm wide and 240 nm to 370 nm tall, and most Ag nanoparticles (Ag NPs) with diameter smaller than 20 nm were successfully deposited inside the tubes. The CS-Gel-Ag-ZnO layer was continuous and uniform. Antibacterial activity against planktonic and adherent bacteria were both investigated. Agar diffusion test against () shows improved antibacterial capacity of the TNTs/Ag + CS-Gel-Ag-ZnO coating, with a clear zone of inhibition (ZOI) up to 14.5 mm wide. Dead adherent bacteria were found on the surface by SEM. The antibacterial rate against planktonic was as high as 99.2% over the 24 h incubation period.