Suppr超能文献

使用标准 U 底和 V 底培养板生成神经上皮类胚体。

Use of standard U-bottom and V-bottom well plates to generate neuroepithelial embryoid bodies.

机构信息

Centro de Biotecnología-FEMSA, Tecnologico de Monterrey, Monterrey, NL, México.

Departamento de Bioingeniería, Tecnologico de Monterrey, Monterrey, NL, México.

出版信息

PLoS One. 2022 May 10;17(5):e0262062. doi: 10.1371/journal.pone.0262062. eCollection 2022.

Abstract

The use of organoids has become increasingly popular recently due to their self-organizing abilities, which facilitate developmental and disease modeling. Various methods have been described to create embryoid bodies (EBs) generated from embryonic or pluripotent stem cells but with varying levels of differentiation success and producing organoids of variable size. Commercial ultra-low attachment (ULA) V-bottom well plates are frequently used to generate EBs. These plates are relatively expensive and not as widely available as standard concave well plates. Here, we describe a cost-effective and low labor-intensive method that creates homogeneous EBs at high yield in standard V- and U-bottom well plates by applying an anti-adherence solution to reduce surface attachment, followed by centrifugation to enhance cellular aggregation. We also explore the effect of different seeding densities, in the range of 1 to 11 ×103 cells per well, for the fabrication of neuroepithelial EBs. Our results show that the use of V-bottom well plates briefly treated with anti-adherent solution (for 5 min at room temperature) consistently yields functional neural EBs in the range of seeding densities from 5 to 11×103 cells per well. A brief post-seeding centrifugation step further enhances EB establishment. EBs fabricated using centrifugation exhibited lower variability in their final size than their non-centrifuged counterparts, and centrifugation also improved EB yield. The span of conditions for reliable EB production is narrower in U-bottom wells than in V-bottom wells (i.e., seeding densities between 7×103 and 11×103 and using a centrifugation step). We show that EBs generated by the protocols introduced here successfully developed into neural organoids and expressed the relevant markers associated with their lineages. We anticipate that the cost-effective and easily implemented protocols presented here will greatly facilitate the generation of EBs, thereby further democratizing the worldwide ability to conduct organoid-based research.

摘要

类器官的自组织能力使其在最近变得越来越受欢迎,这使其非常适合用于发育和疾病建模。已经描述了各种方法来创建由胚胎或多能干细胞生成的胚状体(EBs),但它们的分化成功率和产生的类器官大小各不相同。商业超低附着(ULA)V 底平底孔板常用于生成 EBs。这些板相对昂贵,并且不如标准凹底平底孔板广泛可用。在这里,我们描述了一种具有成本效益且劳动强度低的方法,该方法通过应用抗附着溶液来减少表面附着,然后通过离心来增强细胞聚集,从而在标准 V 底和 U 底平底孔板中以高产量生成均匀的 EBs。我们还探讨了不同接种密度(范围为 1 至 11×103 个细胞/孔)对神经上皮 EBs 形成的影响。我们的结果表明,使用经短暂抗附着溶液处理(在室温下 5 分钟)的 V 底平底孔板始终可以在接种密度范围为 5 至 11×103 个细胞/孔时产生功能神经 EBs。短暂的播种后离心步骤进一步增强了 EB 的建立。与未经离心的 EB 相比,经离心处理的 EB 最终大小的变异性更低,而且离心还提高了 EB 的产量。在 U 底平底孔中可靠地生产 EB 的条件范围比 V 底平底孔更窄(即接种密度在 7×103 和 11×103 之间,并且使用离心步骤)。我们表明,通过这里介绍的方案生成的 EBs 成功发育成神经类器官,并表达了与其谱系相关的相关标记物。我们预计,这里提出的具有成本效益且易于实施的方案将极大地促进 EBs 的生成,从而进一步使全世界能够进行基于类器官的研究。

https://cdn.ncbi.nlm.nih.gov/pmc/blobs/86c9/9089918/ef1ac05c0129/pone.0262062.g001.jpg

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验