Suppr超能文献

ZnO纳米结构的CHOH和NO传感特性:晶体尺寸、缺陷能级与传感性能之间的相关性。

CHOH and NO sensing properties of ZnO nanostructures: correlation between crystal size, defect level and sensing performance.

作者信息

Quy Chu Thi, Thai Nguyen Xuan, Hoa Nguyen Duc, Thanh Le Dang Thi, Hung Chu Manh, Van Duy Nguyen, Van Hieu Nguyen

机构信息

International Training Institute for Materials Science (ITIMS), Hanoi University of Science and Technology (HUST) No. 1, Dai Co Viet Road Hanoi Vietnam

出版信息

RSC Adv. 2018 Feb 1;8(10):5629-5639. doi: 10.1039/c7ra13702h. eCollection 2018 Jan 29.

Abstract

ZnO nanostructures can be synthesized using different techniques for gas sensor applications, but different synthesis methods produce different morphologies, specific surface areas, crystal sizes, and physical properties, which consequently influence the gas-sensing properties of materials. Many parameters such as morphology, specific surface areas, crystal sizes, and defect level can influence the gas-sensing properties of ZnO nanostructures. However, it is not clear which parameter dominates the gas-sensing performance. This study clarified the correlation between crystal size, defect level, and gas-sensing properties of ZnO nanostructures prepared from hydrozincite counterparts by means of field emission scanning electron microscopy, high resolution transmission electron microscopy, X-ray diffraction and photoluminescence spectra. Results showed that the average crystal size of the ZnO nanoparticles increased with thermal decomposition temperatures from 500 °C to 700 °C. However, the sample treated at 600 °C, which has the lowest visible-to-ultraviolet band intensity ratio showed the highest response to ethanol and NO. These results suggested that defect level but not size is the main parameter dominating the sensor performance. The gas sensing mechanism was also elucidated on the basis of the correlation among decomposition temperatures, crystal size, defect level, and gas sensitivity.

摘要

氧化锌纳米结构可采用不同技术合成以用于气体传感器应用,但不同的合成方法会产生不同的形貌、比表面积、晶体尺寸和物理性质,进而影响材料的气敏性能。许多参数,如形貌、比表面积、晶体尺寸和缺陷水平,都会影响氧化锌纳米结构的气敏性能。然而,尚不清楚哪个参数主导气敏性能。本研究通过场发射扫描电子显微镜、高分辨率透射电子显微镜、X射线衍射和光致发光光谱,阐明了由水锌矿对应物制备的氧化锌纳米结构的晶体尺寸、缺陷水平和气敏性能之间的相关性。结果表明,氧化锌纳米颗粒的平均晶体尺寸随着热分解温度从500℃升高到700℃而增大。然而,在600℃处理的样品,其可见-紫外带强度比最低,对乙醇和NO的响应最高。这些结果表明,主导传感器性能的主要参数是缺陷水平而非尺寸。还基于分解温度、晶体尺寸、缺陷水平和气敏性之间的相关性阐明了气敏机理。

https://cdn.ncbi.nlm.nih.gov/pmc/blobs/0716/9078170/e7fdbd3b6dd5/c7ra13702h-f1.jpg

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验