Suppr超能文献

菜籽油生物柴油的制备及其应用

Biodiesel Production from Brassica juncea Using Oleaginous Yeast.

机构信息

Department of Chemical Engineering, Banasthali Vidyapith, Banasthali, Rajasthan, 304022, India.

Department of Bioscience and Biotechnology, Banasthali Vidyapith, Banasthali, Rajasthan, 304022, India.

出版信息

Appl Biochem Biotechnol. 2022 Sep;194(9):4066-4080. doi: 10.1007/s12010-022-03974-w. Epub 2022 May 20.

Abstract

The present study explores the potential of Brassica juncea as a low-cost substrate for biodiesel production through the growth of oleaginous yeast. Firstly, the selected lignocellulosic biomass, i.e., Brassica juncea, was thermochemically pretreated using dilute sodium hydroxide. Optimization of thermochemical pretreatment resulted in significant removal of lignin and hemicellulose with 8.4% increase in cellulose content. Further, the sugar hydrolysate of pretreated biomass was used as a substrate for the growth of selected oleaginous yeast (Cryptococcus sp. MTCC 5455). Lipid and biomass production was optimized using central composite design (CCD) based on response surface methodology (RSM). Maximum biomass and lipid content of 32.50 g/L and 11.05 g/L, respectively, was obtained at 30 °C temperature, pH 6.0, and after 5 days of incubation. The oleaginous yeast lipid was further transesterified using immobilized lipase. The highest fatty acid methyl ester 15% FAME yield was obtained after 10 h of enzymatic reaction. Next, the results of specific gravity, viscosity, flash points, and cloud point of obtained biodiesels were conformed to the ASTM D975 standard. Overall, the present study put forth the cost-effective approach for lignocellulosic biomass-based oleaginous lipid production toward the green synthesis of biodiesel.

摘要

本研究探讨了通过生长油脂酵母将油菜( Brassica juncea )作为低成本生物柴油生产原料的潜力。首先,选择木质纤维素生物质,即油菜,使用稀氢氧化钠进行热化学预处理。热化学预处理的优化导致木质素和半纤维素的显著去除,纤维素含量增加 8.4%。此外,预处理生物质的糖水解产物被用作选定油脂酵母(Cryptococcus sp. MTCC 5455)生长的基质。使用基于响应面法(RSM)的中心复合设计(CCD)优化脂质和生物量的生产。在 30°C 温度、pH 值 6.0 和 5 天孵育后,获得了 32.50 g/L 的最大生物量和 11.05 g/L 的最大脂质含量。然后,使用固定化脂肪酶对油脂酵母脂质进行转酯化。在 10 小时的酶反应后,获得了最高的脂肪酸甲酯 15% FAME 产率。接下来,所获得的生物柴油的比重、粘度、闪点和浊点的结果符合 ASTM D975 标准。总的来说,本研究提出了一种基于木质纤维素生物质的油脂性脂质生产的经济有效的方法,实现了生物柴油的绿色合成。

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验