Department of Electrical and Computer Engineering, North Dakota State University, Fargo, ND 58102, USA.
Department of Physiology and Biomedical Engineering, Mayo Clinic, Rochester, MN 55902, USA.
Biosensors (Basel). 2022 May 13;12(5):332. doi: 10.3390/bios12050332.
The rates of diabetes throughout the world are rising rapidly, impacting nearly every country. New research is focused on better ways to monitor and treat this disease. Breath acetone levels have been defined as a biomarker for diabetes. The development of a method to monitor and diagnose diabetes utilizing breath acetone levels would provide a fast, easy, and non-invasive treatment option. An ideal material for point-of-care diabetes management would need to have a high response to acetone, high acetone selectivity, low interference from humidity, and be able to operate at room temperature. Chemiresistive gas sensors are a promising method for sensing breath acetone due to their simple fabrication and easy operation. Certain semiconductor materials in chemiresistive sensors can react to acetone in the air and produce changes in resistance that can be correlated with acetone levels. While these materials have been developed and show strong responses to acetone with good selectivity, most of them must operate at high temperatures (compared to RT), causing high power consumption, unstable device operation, and complex device design. In this paper, we systematically studied a series of 2-dimensional MXene-based nanocomposites as the sensing materials in chemiresistive sensors to detect 2.86 ppm of acetone at room temperature. Most of them showed great sensitivity and selectivity for acetone. In particular, the 1D/2D CrWO/TiC nanocomposite showed the best sensing response to acetone: nine times higher sensitivity than 1D KWO nanowires. To determine the sensing selectivity, a CrWO/TiC nanocomposite-based sensor was exposed to various common vapors in human breath. The result revealed that it has excellent selectivity for acetone, and far lower responses to other vapors. All these preliminary results indicate that this material is a promising candidate for the creation of a point-of-care diabetes management device.
全球糖尿病发病率迅速上升,几乎影响到每个国家。新的研究集中在更好地监测和治疗这种疾病的方法上。呼气丙酮水平已被定义为糖尿病的生物标志物。开发一种利用呼气丙酮水平监测和诊断糖尿病的方法将提供一种快速、简便、非侵入性的治疗选择。用于即时糖尿病管理的理想材料需要对丙酮具有高响应、高丙酮选择性、低湿度干扰,并且能够在室温下运行。化学电阻式气体传感器是一种很有前途的呼吸丙酮传感方法,因为它们的制造简单,操作方便。化学电阻传感器中的某些半导体材料可以与空气中的丙酮反应,产生可以与丙酮水平相关的电阻变化。虽然这些材料已经被开发出来,并对丙酮表现出很强的响应和良好的选择性,但大多数材料必须在高温下(与室温相比)运行,这会导致高功耗、设备运行不稳定和复杂的设备设计。在本文中,我们系统地研究了一系列二维 MXene 基纳米复合材料作为化学电阻传感器中的传感材料,以在室温下检测 2.86ppm 的丙酮。它们中的大多数对丙酮表现出很高的灵敏度和选择性。特别是,1D/2D CrWO/TiC 纳米复合材料对丙酮的传感响应最好:比 1D KWO 纳米线高 9 倍。为了确定传感选择性,将基于 CrWO/TiC 纳米复合材料的传感器暴露于人体呼吸中的各种常见蒸气中。结果表明,它对丙酮具有极好的选择性,对其他蒸气的响应要低得多。所有这些初步结果表明,这种材料是开发即时糖尿病管理设备的有前途的候选材料。