Suppr超能文献

用于高 rejection-ratio 日盲紫外光探测的 MoS₂/SnSe 异质结构中的掺杂工程

Doping Engineering in the MoS /SnSe Heterostructure toward High-Rejection-Ratio Solar-Blind UV Photodetection.

作者信息

Yu Yali, Shen Tao, Long Haoran, Zhong Mianzeng, Xin Kaiyao, Zhou Ziqi, Wang Xiaoyu, Liu Yue-Yang, Wakabayashi Hitoshi, Liu Liyuan, Yang Juehan, Wei Zhongming, Deng Hui-Xiong

机构信息

State Key Laboratory of Superlattices and Microstructures, Institute of Semiconductors, Chinese Academy of Sciences, Beijing, 100083, China.

Center of Materials Science and Optoelectronics Engineering, University of Chinese Academy of Sciences, Beijing, 100049, China.

出版信息

Adv Mater. 2022 Oct;34(43):e2206486. doi: 10.1002/adma.202206486. Epub 2022 Sep 25.

Abstract

The intentionally designed band alignment of heterostructures and doping engineering are keys to implement device structure design and device performance optimization. According to the theoretical prediction of several typical materials among the transition metal dichalcogenides (TMDs) and group-IV metal chalcogenides, MoS and SnSe present the largest staggered band offset. The large band offset is conducive to the separation of photogenerated carriers, thus MoS /SnSe is a theoretically ideal candidate for fabricating photodetector, which is also verified in the experiment. Furthermore, in order to extend the photoresponse spectrum to solar-blind ultraviolet (SBUV), doping engineering is adopted to form an additional electron state, which provides an extra carrier transition channel. In this work, pure MoS /SnSe and doped MoS /SnSe heterostructures are both fabricated. In terms of the photoelectric performance evaluation, the rejection ratio R /R of the photodetector based on doped MoS /SnSe is five orders of magnitude higher than that of pure MoS /SnSe , while the response time is obviously optimized by 3 orders. The results demonstrate that the combination of band alignment and doping engineering provides a new pathway for constructing SBUV photodetectors.

摘要

异质结构的有意设计能带排列和掺杂工程是实现器件结构设计和器件性能优化的关键。根据过渡金属二硫属化物(TMDs)和IV族金属硫属化物中几种典型材料的理论预测,MoS和SnSe呈现出最大的交错能带偏移。大的能带偏移有利于光生载流子的分离,因此MoS/SnSe是制造光电探测器的理论理想候选材料,这也在实验中得到了验证。此外,为了将光响应光谱扩展到日盲紫外(SBUV),采用掺杂工程形成额外的电子态,这提供了一个额外的载流子跃迁通道。在这项工作中,制备了纯MoS/SnSe和掺杂MoS/SnSe异质结构。在光电性能评估方面,基于掺杂MoS/SnSe的光电探测器的拒斥比R/R比纯MoS/SnSe高五个数量级,而响应时间明显优化了三个数量级。结果表明,能带排列和掺杂工程的结合为构建SBUV光电探测器提供了一条新途径。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验