Maniš Jaroslav, Mach Jindřich, Bartošík Miroslav, Šamořil Tomáš, Horák Michal, Čalkovský Vojtěch, Nezval David, Kachtik Lukáš, Konečný Martin, Šikola Tomáš
CEITEC BUT, Brno University of Technology Technická 3058/10 616 00 Brno Czech Republic
Institute of Physical Engineering, Brno University of Technology Technická 2 616 69 Brno Czech Republic.
Nanoscale Adv. 2022 Jul 19;4(17):3549-3556. doi: 10.1039/d2na00175f. eCollection 2022 Aug 23.
As the characteristic dimensions of modern top-down devices are getting smaller, such devices reach their operational limits imposed by quantum mechanics. Thus, two-dimensional (2D) structures appear to be one of the best solutions to meet the ultimate challenges of modern optoelectronic and spintronic applications. The representative of III-V semiconductors, gallium nitride (GaN), is a great candidate for UV and high-power applications at a nanoscale level. We propose a new way of fabrication of 2D GaN on the Si(111) 7 × 7 surface using post-nitridation of Ga droplets by hyperthermal ( = 50 eV) nitrogen ions at low substrate temperatures ( < 220 °C). The deposition of Ga droplets and their post-nitridation are carried out using an effusion cell and a special atom/ion beam source developed by our group, respectively. This low-temperature droplet epitaxy (LTDE) approach provides well-defined ultra-high vacuum growth conditions during the whole fabrication process resulting in unique 2D GaN nanostructures. A sharp interface between the GaN nanostructures and the silicon substrate together with a suitable elemental composition of nanostructures was confirmed by TEM. In addition, SEM, X-ray photoelectron spectroscopy (XPS), AFM and Auger microanalysis were successful in enabling a detailed characterization of the fabricated GaN nanostructures.
随着现代自顶向下器件的特征尺寸越来越小,此类器件达到了由量子力学所施加的运行极限。因此,二维(2D)结构似乎是应对现代光电子和自旋电子应用终极挑战的最佳解决方案之一。作为III-V族半导体的代表,氮化镓(GaN)是纳米级紫外和高功率应用的理想候选材料。我们提出了一种在Si(111) 7×7表面上制备二维GaN的新方法,即在低衬底温度(<220°C)下,利用超热(=50 eV)氮离子对Ga液滴进行后氮化处理。Ga液滴的沉积及其后氮化处理分别使用一个喷射单元和我们团队开发的一种特殊的原子/离子束源来进行。这种低温液滴外延(LTDE)方法在整个制备过程中提供了明确的超高真空生长条件,从而得到独特的二维GaN纳米结构。通过透射电子显微镜(TEM)证实了GaN纳米结构与硅衬底之间的清晰界面以及纳米结构合适的元素组成。此外,扫描电子显微镜(SEM)、X射线光电子能谱(XPS)、原子力显微镜(AFM)和俄歇微分析成功地实现了对所制备的GaN纳米结构的详细表征。