Institute of Biomedical Engineering, Karlsruhe Institute of Technology (KIT), Karlsruhe, Germany.
Institute for Automation and Applied Informatics, Karlsruhe Institute of Technology (KIT), Karlsruhe, Germany.
Biophys J. 2022 Nov 15;121(22):4247-4259. doi: 10.1016/j.bpj.2022.10.020. Epub 2022 Oct 19.
The sinoatrial node (SAN) is a complex structure that spontaneously depolarizes rhythmically ("pacing") and excites the surrounding non-automatic cardiac cells ("drive") to initiate each heart beat. However, the mechanisms by which the SAN cells can activate the large and hyperpolarized surrounding cardiac tissue are incompletely understood. Experimental studies demonstrated the presence of an insulating border that separates the SAN from the hyperpolarizing influence of the surrounding myocardium, except at a discrete number of sinoatrial exit pathways (SEPs). We propose a highly detailed 3D model of the human SAN, including 3D SEPs to study the requirements for successful electrical activation of the primary pacemaking structure of the human heart. A total of 788 simulations investigate the ability of the SAN to pace and drive with different heterogeneous characteristics of the nodal tissue (gradient and mosaic models) and myocyte orientation. A sigmoidal distribution of the tissue conductivity combined with a mosaic model of SAN and atrial cells in the SEP was able to drive the right atrium (RA) at varying rates induced by gradual If block. Additionally, we investigated the influence of the SEPs by varying their number, length, and width. SEPs created a transition zone of transmembrane voltage and ionic currents to enable successful pace and drive. Unsuccessful simulations showed a hyperpolarized transmembrane voltage (-66 mV), which blocked the L-type channels and attenuated the sodium-calcium exchanger. The fiber direction influenced the SEPs that preferentially activated the crista terminalis (CT). The location of the leading pacemaker site (LPS) shifted toward the SEP-free areas. LPSs were located closer to the SEP-free areas (3.46 ± 1.42 mm), where the hyperpolarizing influence of the CT was reduced, compared with a larger distance from the LPS to the areas where SEPs were located (7.17± 0.98 mm). This study identified the geometrical and electrophysiological aspects of the 3D SAN-SEP-CT structure required for successful pace and drive in silico.
窦房结(SAN)是一个复杂的结构,它能自动有节奏地去极化(“起搏”),并兴奋周围的非自动心脏细胞(“驱动”),从而引发每次心跳。然而,SAN 细胞激活大而超极化的周围心脏组织的机制尚不完全清楚。实验研究表明,存在一个绝缘边界,将 SAN 与周围心肌的去极化影响隔离开来,但在离散数量的窦房结出口途径(SEP)处除外。我们提出了一个高度详细的人类 SAN 三维模型,包括 3D SEP,以研究成功激活人类心脏主要起搏结构的要求。共有 788 次模拟研究了具有不同的节段组织(梯度和镶嵌模型)和心肌细胞取向异质性特征的 SAN 起搏和驱动的能力。组织电导率的 sigmoidal 分布与 SEP 中的 SAN 和心房细胞镶嵌模型相结合,能够以逐渐的 If 阻断诱导的不同速率起搏右心房(RA)。此外,我们还通过改变 SEP 的数量、长度和宽度来研究它们的影响。SEP 产生了跨膜电压和离子电流的过渡区,以实现成功的起搏和驱动。不成功的模拟显示跨膜电压超极化(-66mV),从而阻断 L 型通道并减弱钠钙交换器。纤维方向影响了优先激活冠状窦终末(CT)的 SEP。起搏位点(LPS)的位置向无 SEP 区转移。与距离 LPS 到有 SEP 的区域较远的地方相比,LPS 更靠近无 SEP 区域(3.46±1.42mm),那里 CT 的去极化影响减小(7.17±0.98mm)。这项研究确定了 3D SAN-SEP-CT 结构的几何和电生理方面,这是成功起搏和驱动的必要条件。