Barrio Jesús, Pedersen Angus, Sarma Saurav Ch, Bagger Alexander, Gong Mengjun, Favero Silvia, Zhao Chang-Xin, Garcia-Serres Ricardo, Li Alain Y, Zhang Qiang, Jaouen Frédéric, Maillard Frédéric, Kucernak Anthony, Stephens Ifan E L, Titirici Maria-Magdalena
Department of Materials, Royal School of Mines, Imperial College London, London, SW7 2AZ, UK.
Department of Chemical Engineering, Imperial College London, London, SW7 2AZ, UK.
Adv Mater. 2023 Apr;35(14):e2211022. doi: 10.1002/adma.202211022. Epub 2023 Feb 22.
Atomic Fe in N-doped carbon (FeNC) electrocatalysts for oxygen (O ) reduction at the cathode of proton exchange membrane fuel cells are the most promising alternative to platinum-group-metal catalysts. Despite recent progress on atomic FeNC O reduction, their controlled synthesis and stability for practical applications remain challenging. A two-step synthesis approach has recently led to significant advances in terms of Fe-loading and mass activity; however, the Fe utilization remains low owing to the difficulty of building scaffolds with sufficient porosity that electrochemically exposes the active sites. Herein, this issue is addressed by coordinating Fe in a highly porous nitrogen-doped carbon support (≈3295 m g ), prepared by pyrolysis of inexpensive 2,4,6-triaminopyrimidine and a Mg salt active site template and porogen. Upon Fe coordination, a high electrochemical active site density of 2.54 × 10 sites g and a record 52% FeN electrochemical utilization based on in situ nitrite stripping are achieved. The Fe single atoms are characterized pre- and post-electrochemical accelerated stress testing by aberration-corrected high-angle annular dark field scanning transmission electron microscopy, showing no Fe clustering. Moreover, ex situ X-ray absorption spectroscopy and low-temperature Mössbauer spectroscopy suggest the presence of penta-coordinated Fe sites, which are further studied by density functional theory calculations.
用于质子交换膜燃料电池阴极氧还原的氮掺杂碳(FeNC)电催化剂中的原子铁是铂族金属催化剂最有前途的替代品。尽管最近在原子FeNC氧还原方面取得了进展,但它们的可控合成和实际应用中的稳定性仍然具有挑战性。一种两步合成方法最近在铁负载量和质量活性方面取得了重大进展;然而,由于难以构建具有足够孔隙率的支架以电化学暴露活性位点,铁的利用率仍然很低。在此,通过在由廉价的2,4,6-三氨基嘧啶和镁盐活性位点模板及致孔剂热解制备的高度多孔的氮掺杂碳载体(≈3295 m² g⁻¹)中配位铁来解决这个问题。在铁配位后,基于原位亚硝酸盐溶出实现了2.54×10²⁰ 位点 g⁻¹ 的高电化学活性位点密度和创纪录的52%的FeN电化学利用率。通过像差校正高角度环形暗场扫描透射电子显微镜对铁单原子在电化学加速应力测试前后进行表征,结果表明没有铁聚集。此外,非原位X射线吸收光谱和低温穆斯堡尔光谱表明存在五配位铁位点,并通过密度泛函理论计算对其进行了进一步研究。