Suppr超能文献

从不同合成方法得到的假多晶型形式中通过拉曼研究茶碱和柠檬酸共结晶机制的分析。

Analysis of Co-Crystallization Mechanism of Theophylline and Citric Acid from Raman Investigations in Pseudo Polymorphic Forms Obtained by Different Synthesis Methods.

机构信息

UMR 8207, UMET-Unité Matériaux et Transformations, University Lille, CNRS, INRAE, Centrale Lille, F-59000 Lille, France.

出版信息

Molecules. 2023 Feb 7;28(4):1605. doi: 10.3390/molecules28041605.

Abstract

Designing co-crystals can be considered as a commonly used strategy to improve the bioavailability of many low molecular weight drug candidates. The present study has revealed the existence of three pseudo polymorphic forms of theophylline-citric acid (TP-CA) co-crystal obtained via different routes of synthesis. These forms are characterized by different degrees of stability in relation with the strength of intermolecular forces responsible for the co-crystalline cohesion. Combining low- and high-frequency Raman investigations made it possible to identify anhydrous and hydrate forms of theophylline-citric acid co-crystals depending on the preparation method. It was shown that the easiest form to synthesize (form 1'), by milling one hydrate with an anhydrous reactant, is very metastable, and transforms into the anhydrous form 1 upon heating or into the hydrated form 2 when it is exposed to humidity. Raman investigations performed in situ during the co-crystallization of forms 1 and 2 have shown that two different types of H-bonding ensure the co-crystalline cohesion depending on the presence of water. In the hydrated form 2, the cohesive forces are related to strong O-H … O H-bonds between water molecules and the reactants. In the anhydrous form 1, the co-crystalline cohesion is ensured by very weak H-bonds between the two anhydrous reactants, interpreted as corresponding to π-H-bonding. The very weak strength of the cohesive forces in form 1 explains the difficulty to directly synthesize the anhydrous co-crystal.

摘要

设计共晶可以被认为是提高许多低分子量药物候选物生物利用度的常用策略。本研究揭示了茶碱-柠檬酸(TP-CA)共晶的三种假多晶型形式的存在,这些形式是通过不同的合成途径获得的。这些形式在与分子间力强度有关的稳定性方面表现出不同的程度,这些力是共晶凝聚的原因。结合低频和高频拉曼研究,有可能根据制备方法识别出茶碱-柠檬酸共晶的无水和水合形式。结果表明,最容易合成的形式(形式 1')通过将一种水合物与无水反应物研磨来合成,是非常亚稳的,在加热时会转化为无水形式 1,或者在暴露于湿度时会转化为水合形式 2。在形式 1 和 2 的共结晶过程中进行的原位拉曼研究表明,两种不同类型的氢键根据水的存在情况确保了共晶的凝聚。在水合形式 2 中,结合力与水分子和反应物之间的强 O-H … O H-键有关。在无水形式 1 中,共晶的凝聚是由两个无水反应物之间非常弱的氢键保证的,这被解释为对应于π-H-键。形式 1 中结合力非常弱的强度解释了直接合成无水共晶的困难。

https://cdn.ncbi.nlm.nih.gov/pmc/blobs/b0e3/9960353/2048a97f336b/molecules-28-01605-g001.jpg

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验