Saha Arighna, Narula Kritika, Mishra Prashant, Biswas Goutam, Bhakta Snehasis
Department of Chemistry, Cooch Behar Panchanan Barma University Cooch Behar West Bengal India 736101
Department of Chemistry, Cooch Behar College Cooch Behar West Bengal India 736101
Nanoscale Adv. 2023 Feb 2;5(5):1386-1396. doi: 10.1039/d2na00872f. eCollection 2023 Feb 28.
Nowadays, silica nanoparticles are gaining tremendous importance because of their wide applications across different domains such as drug delivery, chromatography, biosensors, and chemosensors. The synthesis of silica nanoparticles generally requires a high percentage composition of organic solvent in an alkali medium. The eco-friendly synthesis of silica nanoparticles in bulk amounts can help save the environment and is cost-effective. Herein, efforts have been made to minimize the concentration of organic solvents used during synthesis the addition of a low concentration of electrolytes, , NaCl. The effects of electrolytes and solvent concentrations on nucleation kinetics, particle growth, and particle size were investigated. Ethanol was used as a solvent in various concentrations, ranging from 60% to 30%, and to optimize and validate the reaction conditions, isopropanol and methanol were also utilized as solvents. The concentration of aqua-soluble silica was determined using the molybdate assay to establish reaction kinetics, and this approach was also utilized to quantify the relative concentration changes in particles throughout the synthesis. The prime feature of the synthesis is the reduction in organic solvent usage by up to 50% using 68 mM NaCl. The surface zeta potential was reduced after the addition of an electrolyte, which made the condensation process faster and helped reaching the critical aggregation concentration in a shorter time. The effect of temperature was also monitored, and we obtained homogeneous and uniform nanoparticles by increasing the temperature. We found that it is possible to tune the size of the nanoparticles by changing the concentration of electrolytes and the temperature of the reaction using an eco-friendly approach. The overall cost of the synthesis can also be reduced by ∼35% by adding electrolytes.
如今,二氧化硅纳米颗粒因其在药物递送、色谱分析、生物传感器和化学传感器等不同领域的广泛应用而变得极为重要。二氧化硅纳米颗粒的合成通常需要在碱性介质中使用高比例的有机溶剂。大量合成环保型二氧化硅纳米颗粒有助于保护环境且具有成本效益。在此,已努力通过添加低浓度电解质(如氯化钠)来尽量减少合成过程中使用的有机溶剂浓度。研究了电解质和溶剂浓度对成核动力学、颗粒生长和颗粒尺寸的影响。使用了浓度范围从60%到30%的不同浓度乙醇作为溶剂,并且为了优化和验证反应条件,还使用了异丙醇和甲醇作为溶剂。使用钼酸盐测定法测定水溶性二氧化硅的浓度以建立反应动力学,并且该方法还用于量化整个合成过程中颗粒的相对浓度变化。合成的主要特点是使用68 mM氯化钠可将有机溶剂用量减少多达50%。添加电解质后表面zeta电位降低,这使得凝聚过程更快,并有助于在更短时间内达到临界聚集浓度。还监测了温度的影响,通过提高温度我们获得了均匀一致的纳米颗粒。我们发现通过使用环保方法改变电解质浓度和反应温度可以调节纳米颗粒的尺寸。通过添加电解质,合成的总成本也可降低约35%。