Suppr超能文献

用于脊髓损伤修复的载神经干细胞三维生物打印导电复合水凝胶支架中星形胶质细胞分化受到抑制。

Inhibited astrocytic differentiation in neural stem cell-laden 3D bioprinted conductive composite hydrogel scaffolds for repair of spinal cord injury.

作者信息

Song Shaoshuai, Li Yuxuan, Huang Jie, Cheng Shengnan, Zhang Zhijun

机构信息

School of Nano-Tech and Nano-Bionics, University of Science and Technology of China (USTC), 96 Jinzhai Road, Hefei 230026, China; CAS Key Laboratory of Nano-Bio Interface, Division of Nanobiomedicine, Suzhou Institute of Nano-Tech and Nano-Bionics (SINANO), Chinese Academy of Sciences, 398 Ruoshui Road, Suzhou 215123, China.

School of Nano-Tech and Nano-Bionics, University of Science and Technology of China (USTC), 96 Jinzhai Road, Hefei 230026, China; CAS Key Laboratory of Nano-Bio Interface, Division of Nanobiomedicine, Suzhou Institute of Nano-Tech and Nano-Bionics (SINANO), Chinese Academy of Sciences, 398 Ruoshui Road, Suzhou 215123, China.

出版信息

Biomater Adv. 2023 May;148:213385. doi: 10.1016/j.bioadv.2023.213385. Epub 2023 Mar 14.

Abstract

The emergence of three-dimensional (3D) bioprinting technology has attracted ever-increasing attention in engineered tissue fabrication for stem cell-based tissue repair. However, the in vivo performance of transplanted stem cells in the tissue engineering scaffolds is still a major concern for regenerative medicine researches. Especially for neural stem cell (NSC) transplantation, the uncontrollable differentiation of the NSCs in host often leads to a poor therapeutic effect in nerve tissue repair, such as spinal cord injury (SCI) repair. To address this issue, we have fabricated a conductive composite hydrogel (CCH) scaffold loading with NSCs by 3D bioprinting, for delivering the NSCs to injured spinal cord and repairing the propriospinal nerve circuit. In our strategy, a novel conductive polymer (PEDOT:CSMA,TA) was synthesized and introduced into a photocrosslinkable gelatin/polyethylene glycol physical-gel matrix, thereby forming a composite bioink with well shear-thinning and self-healing properties. The composite bioink we prepared was then printed into the NSC-laden CCH scaffold with high shape fidelity and similar physicochemical properties to native spinal cord tissues. The NSCs encapsulated in the bioprinted CCH scaffold extended their neurites to form superior physical contact with the neighboring cells as well as the electroconductive matrix, and maintained a predominant in vivo neuronal differentiation, accompanying with few astrocytic production in the lesion area after transplantation into the SCI sites. As a result, the removal of glial scar tissues and the regeneration of well-developed nerve fibres sequentially happened, which not only facilitated nerve tissue development, but also accelerated locomotor function recovery in the SCI rats. By exploring the application of conductive biomaterials in stem cell-based SCI therapy, this work represents a feasible, new approach to precisely construct tissue engineering scaffolds for stem cell-based therapy in traumatic SCI and other nervous system diseases.

摘要

三维(3D)生物打印技术的出现,在用于基于干细胞的组织修复的工程组织制造中引起了越来越多的关注。然而,组织工程支架中移植干细胞的体内性能仍然是再生医学研究的主要关注点。特别是对于神经干细胞(NSC)移植,宿主中NSC的不可控分化常常导致神经组织修复(如脊髓损伤(SCI)修复)的治疗效果不佳。为了解决这个问题,我们通过3D生物打印制备了一种负载NSC的导电复合水凝胶(CCH)支架,用于将NSC递送至损伤的脊髓并修复脊髓固有神经回路。在我们的策略中,合成了一种新型导电聚合物(PEDOT:CSMA,TA)并将其引入可光交联的明胶/聚乙二醇物理凝胶基质中,从而形成具有良好剪切变稀和自愈性能的复合生物墨水。然后,我们制备的复合生物墨水被打印成负载NSC的CCH支架,其具有高形状保真度且物理化学性质与天然脊髓组织相似。封装在生物打印CCH支架中的NSC伸出其神经突,与相邻细胞以及导电基质形成良好的物理接触,并在体内保持主要的神经元分化,移植到SCI部位后,损伤区域几乎没有星形胶质细胞产生。结果,胶质瘢痕组织的清除和发育良好的神经纤维的再生依次发生,这不仅促进了神经组织发育,还加速了SCI大鼠运动功能的恢复。通过探索导电生物材料在基于干细胞的SCI治疗中的应用,这项工作代表了一种可行的新方法,可精确构建用于创伤性SCI和其他神经系统疾病的基于干细胞治疗的组织工程支架。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验