Suppr超能文献

利用卷曲乳杆菌进行阴道应用的生物打印制造和特性研究。

Fabrication and characterization of bioprints with Lactobacillus crispatus for vaginal application.

机构信息

Department of Bioengineering, University of Louisville Speed School of Engineering, Louisville, KY 40202, USA.

Center for Predictive Medicine, University of Louisville, Louisville, KY 40202, USA.

出版信息

J Control Release. 2023 May;357:545-560. doi: 10.1016/j.jconrel.2023.04.023. Epub 2023 Apr 21.

Abstract

Bacterial vaginosis (BV) is characterized by low levels of lactobacilli and overgrowth of potential pathogens in the female genital tract. Current antibiotic treatments often fail to treat BV in a sustained manner, and > 50% of women experience recurrence within 6 months post-treatment. Recently, lactobacilli have shown promise for acting as probiotics by offering health benefits in BV. However, as with other active agents, probiotics often require intensive administration schedules incurring difficult user adherence. Three-dimensional (3D)-bioprinting enables fabrication of well-defined architectures with tunable release of active agents, including live mammalian cells, offering the potential for long-acting probiotic delivery. One promising bioink, gelatin alginate has been previously shown to provide structural stability, host compatibility, viable probiotic incorporation, and cellular nutrient diffusion. This study formulates and characterizes 3D-bioprinted Lactobacillus crispatus-containing gelatin alginate scaffolds for gynecologic applications. Different weight to volume (w/v) ratios of gelatin alginate were bioprinted to determine formulations with highest printing resolution, and different crosslinking reagents were evaluated for effect on scaffold integrity via mass loss and swelling measurements. Post-print viability, sustained-release, and vaginal keratinocyte cytotoxicity assays were conducted. A 10:2 (w/v) gelatin alginate formulation was selected based on line continuity and resolution, while degradation and swelling experiments demonstrated greatest structural stability with dual genipin and calcium crosslinking, showing minimal mass loss and swelling over 28 days. 3D-bioprinted L. crispatus-containing scaffolds demonstrated sustained release and proliferation of live bacteria over 28 days, without impacting viability of vaginal epithelial cells. This study provides in vitro evidence for 3D-bioprinted scaffolds as a novel strategy to sustain probiotic delivery with the ultimate goal of restoring vaginal lactobacilli following microbiological disturbances.

摘要

细菌性阴道病 (BV) 的特征是女性生殖道内乳杆菌水平降低和潜在病原体过度生长。目前的抗生素治疗方法往往不能持续有效地治疗 BV,超过 50%的女性在治疗后 6 个月内复发。最近,乳杆菌作为益生菌显示出了希望,因为它在 BV 中提供了健康益处。然而,与其他活性药物一样,益生菌通常需要密集的给药方案,导致患者难以坚持使用。三维 (3D) 生物打印能够制造具有可调节活性药物释放的定义明确的结构,包括活哺乳动物细胞,为长效益生菌输送提供了潜力。以前已经证明,一种有前途的生物墨水——明胶-海藻酸钠,能够提供结构稳定性、宿主相容性、可行的益生菌掺入和细胞营养扩散。本研究构建并表征了用于妇科应用的 3D 生物打印含乳杆菌的明胶-海藻酸钠支架。打印不同的明胶-海藻酸钠重量与体积比 (w/v),以确定具有最高打印分辨率的配方,并通过质量损失和溶胀测量评估不同的交联试剂对支架完整性的影响。进行了打印后细胞活力、持续释放和阴道角质形成细胞细胞毒性测定。根据线条连续性和分辨率,选择了 10:2 (w/v) 的明胶-海藻酸钠配方,而降解和溶胀实验表明,使用双重京尼平交联和钙交联具有最大的结构稳定性,在 28 天内质量损失和溶胀最小。3D 生物打印含乳杆菌的支架在 28 天内表现出持续的活细菌释放和增殖,而不影响阴道上皮细胞的活力。本研究为 3D 生物打印支架作为一种新型策略提供了体外证据,该策略可用于持续输送益生菌,最终目标是在微生物失调后恢复阴道乳杆菌。

相似文献

引用本文的文献

本文引用的文献

8
Hybrid Gelatin Hydrogels in Nanomedicine Applications.纳米医学应用中的混合明胶水凝胶。
ACS Appl Bio Mater. 2021 Apr 19;4(4):2886-2906. doi: 10.1021/acsabm.0c01630. Epub 2021 Mar 9.

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验