Department of Optical Science and Engineering, and Shanghai Ultra-Precision Optical Manufacturing Engineering Center, Fudan University, Shanghai 200433, China.
Yiwu Research Institute, Fudan University, Yiwu 322000, China.
Sensors (Basel). 2023 Jul 6;23(13):6184. doi: 10.3390/s23136184.
We present a straightforward approach to develop a high-detectivity silicon (Si) sub-bandgap near-infrared (NIR) photodetector (PD) based on textured Si/Au nanoparticle (NP) Schottky junctions coated with graphene film. This is a photovoltaic-type PD that operates at 0 V bias. The texturing of Si is to trap light for NIR absorption enhancement, and Schottky junctions facilitate sub-bandgap NIR absorption and internal photoemission. Both Au NPs and the texturing of Si were made in self-organized processes. Graphene offers additional pathways for hot electron transport and to increase photocurrent. Under 1319 nm illumination at room temperature, a responsivity of 3.9 mA/W and detectivity of 7.2 × 10 cm × (Hz)/W were obtained. Additionally, at -60 °C, the detectivity increased to 1.5 × 10 cm × (Hz)/W, with the dark current density reduced and responsivity unchanged. The result of this work demonstrates a facile method to create high-performance Si sub-bandgap NIR PDs for promising applications at ambient temperatures.
我们提出了一种简单的方法,基于纹理化的硅/金纳米颗粒(NP)肖特基结,制备高灵敏度硅(Si)亚带隙近红外(NIR)光电探测器(PD),该肖特基结上覆盖有石墨烯薄膜。这是一种工作在 0 V 偏压的光伏型 PD。硅的纹理化是为了捕获光以增强 NIR 吸收,肖特基结有利于亚带隙 NIR 吸收和内光电发射。Au NPs 和 Si 的纹理化都是通过自组织过程完成的。石墨烯提供了额外的热电子传输途径,并增加了光电流。在室温下 1319nm 光照下,获得了 3.9 mA/W 的响应率和 7.2×10cm×(Hz)/W 的探测率。此外,在-60°C 下,探测率增加到 1.5×10cm×(Hz)/W,暗电流密度降低,响应率不变。这项工作的结果表明,一种简单的方法可以创建高性能 Si 亚带隙近红外 PD,有望在环境温度下得到应用。