Suppr超能文献

羧乙基膦酸处理并用骨形态发生蛋白-2(BMP-2)功能化对牙种植体骨结合的影响:小型猪模型的初步研究

Effect on osseointegration of dental implants treated with carboxyethylphosphonic acid and functionalized with BMP-2: preliminary study on a minipig model.

作者信息

López-Valverde Nansi, Aragoneses Javier, Rodríguez Cinthia, Aragoneses Juan Manuel

机构信息

Department of Surgery, Faculty of Medicine, Instituto de Investigación Biomédica de Salamanca (IBSAL), Universidad de Salamanca, Salamanca, Spain.

Department of Medicine and Medical Specialties, Faculty of Health Sciences, Universidad Alcalá de Henares, Madrid, Spain.

出版信息

Front Bioeng Biotechnol. 2023 Jul 27;11:1244667. doi: 10.3389/fbioe.2023.1244667. eCollection 2023.

Abstract

Rough titanium surfaces biofunctionalised by osteogenic proteins, such as BMP-2, have been shown to accelerate the osseointegration process and reduce waiting times for prosthetic loading. The preclinical study presented here compared the bone in contact with the implant and bone neoformation and density between titanium (Ti) implants with a conventional etched surface (SLA type) and others treated with carboxyethylphosphonic acid (CEPA) and bone morphogenetic protein 2 (BMP-2), after 4 weeks of implantation in the tibia of a minipig model. Sixteen implants (eight experimental and eight control) of Ti-Al16-V4 with a tapered screw design and internal hexagonal connection were randomly inserted into the tibiae of four minipigs, four in each tibia. The experimental implants were treated with CEPA and BMP-2 and sterilised with gamma radiation (25 KG). The insertion torque was 40 N and primary stability was measured with the Osstell device (ISQ 64 ± 2.6). Five bone parameters were evaluated: bone in contact with the implant (BIC), bone in contact with the corrected implant (BICc), new bone formation (BV/TV), bone density between threads (BAI/TA) and peri-implant bone density (BAP/TA). A histomorphometric study was performed and the samples were digitised with Adobe Photoshop Cs6. Statistical analysis of the variables was performed using SAS 9.4. After a period of 4 weeks, no significant clinical signs were observed and all implants were integrated. Light microscopy of the experimental group revealed an ICB with no signs of fiber tissue, but with areas of ectopic new bone in the medullary space. Statistical analysis showed significant results for BIC and BICc ( = 0.0001 and = 0.001, respectively). No statistical signification was found for the other parameters evaluated. Despite the limitations of this study, our results demonstrated that dental implant surfaces treated with CEPA and BMP-2 improve their biological response to osseointegration.

摘要

经成骨蛋白(如骨形态发生蛋白-2,BMP-2)进行生物功能化处理的粗糙钛表面,已被证明可加速骨结合过程,并减少义齿加载的等待时间。本文所呈现的临床前研究比较了在小型猪模型胫骨中植入4周后,具有传统蚀刻表面(SLA型)的钛(Ti)种植体与经羧乙基膦酸(CEPA)和骨形态发生蛋白2(BMP-2)处理的种植体,其与种植体接触的骨、新骨形成及骨密度情况。将16个具有锥形螺钉设计和内六角连接的Ti-Al16-V4种植体(8个实验组和8个对照组)随机植入4只小型猪的胫骨中,每只胫骨植入4个。实验组种植体用CEPA和BMP-2处理,并经γ射线(25KG)灭菌。植入扭矩为40N,使用Osstell装置(ISQ 64±2.6)测量初期稳定性。评估了5项骨参数:与种植体接触的骨(BIC)、与修正种植体接触的骨(BICc)、新骨形成(BV/TV)、螺纹间骨密度(BAI/TA)和种植体周围骨密度(BAP/TA)。进行了组织形态计量学研究,并使用Adobe Photoshop Cs6对样本进行数字化处理。使用SAS 9.4对变量进行统计分析。4周后,未观察到明显的临床症状,所有种植体均已整合。实验组的光学显微镜检查显示骨-种植体结合良好,无纤维组织迹象,但在骨髓腔内有异位新骨区域。统计分析显示BIC和BICc有显著结果(分别为 = 0.0001和 = 0.001)。对于评估的其他参数未发现统计学意义。尽管本研究存在局限性,但我们的结果表明,经CEPA和BMP-2处理的牙种植体表面改善了其对骨结合的生物学反应。

https://cdn.ncbi.nlm.nih.gov/pmc/blobs/ea98/10413559/83d8a685be43/fbioe-11-1244667-g001.jpg

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验