Suppr超能文献

通过使用绿色聚合物喷雾干燥法对荔枝皮和咖啡果肉提取物中原花青素进行特定包封

The Specific Encapsulation of Procyanidins from Litchi Peel and Coffee Pulp Extracts via Spray-Drying Using Green Polymers.

作者信息

Vázquez-Núñez María de Los Ángeles, Aguilar-Zárate Mayra, Gómez-García Ricardo, Reyes-Luna Carlos, Aguilar-Zárate Pedro, Michel Mariela R

机构信息

Facultad de Estudios Profesionales Zona Huasteca, Universidad Autónoma de San Luis Potosí, Romualdo del Campo 501, Colonia Rafael Curiel, Ciudad Valles 79060, San Luis Potosí, Mexico.

Facultad de Ciencias Químicas-CIEP, Universidad Autónoma de San Luis Potosí, Av. Dr. Manuel Nava 6, Zona Universitaria, Mexico City 78210, San Luis Potosí, Mexico.

出版信息

Polymers (Basel). 2023 Sep 19;15(18):3823. doi: 10.3390/polym15183823.

Abstract

Polyphenols called procyanidins can be extracted from agro-industrial waste like litchi peel and coffee pulp. However, their efficacy is limited due to instability, which hinders both the bioavailability and preservation of their activity. This study aims to establish the ideal encapsulation conditions required to preserve the procyanidin properties found in extracts taken from litchi peel and coffee pulp. To attain the maximum procyanidin encapsulation efficacy (EE), the Taguchi method was utilized to streamline the spray-drying conditions for different wall materials-maltodextrin (MD), whey protein (WP), citrus pectin (CP), and skim milk (SM). The optimized conditions consisted of feed flow (3, 4.5, and 6 mL/min), temperature (125, 150, and 175 °C), and airflow (30, 35, and 40 m/h). The microcapsules were characterized using ABTS, DPPH, lipoperoxidation, and scanning electron microscopy. Objective evaluations revealed that MD was the most effective encapsulation material for the litchi extract, whereas WP was the optimal option for the coffee extract. Of all the factors considered in the spray-drying process, feed flow had the strongest impact. The spray-drying process for the litchi peel extracts achieved high procyanidin encapsulation efficiencies at a feed flow rate of 4.5 mL/min, a temperature of 150 °C, and an airflow rate of 35 m/h. Meanwhile, the coffee extract spray drying achieved similar results at a feed flow rate of 4.5 mL/min, a temperature of 175 °C, and an airflow rate of 40 m/h. Encapsulation efficiencies of 98.1% and 93.6% were observed for the litchi and coffee extracts, respectively, under the mentioned optimal conditions. The microencapsulation process was successful in preserving the antioxidant properties of procyanidins. The microcapsules' size ranged from 2.6 to 3.2 micrometers. The results imply that the phenolic compounds present in the extracts function as effective antioxidant agents.

摘要

称为原花青素的多酚类物质可以从荔枝皮和咖啡渣等农业工业废料中提取。然而,由于其不稳定性,它们的功效受到限制,这阻碍了其生物利用度及其活性的保存。本研究旨在确定保存从荔枝皮和咖啡渣提取物中发现的原花青素特性所需的理想包封条件。为了获得最大的原花青素包封效率(EE),采用田口方法来优化不同壁材——麦芽糊精(MD)、乳清蛋白(WP)、柑橘果胶(CP)和脱脂牛奶(SM)的喷雾干燥条件。优化条件包括进料流速(3、4.5和6 mL/分钟)、温度(125、150和175°C)和气流速度(30、35和40米/小时)。使用ABTS、DPPH、脂质过氧化和扫描电子显微镜对微胶囊进行表征。客观评估表明,MD是荔枝提取物最有效的包封材料,而WP是咖啡提取物的最佳选择。在喷雾干燥过程中考虑的所有因素中,进料流速的影响最大。荔枝皮提取物的喷雾干燥过程在进料流速为4.5 mL/分钟、温度为150°C和气流速度为35米/小时时实现了高原花青素包封效率。同时,咖啡提取物喷雾干燥在进料流速为4.5 mL/分钟、温度为175°C和气流速度为40米/小时时取得了类似的结果。在上述最佳条件下,荔枝和咖啡提取物的包封效率分别为98.1%和93.6%。微胶囊化过程成功地保留了原花青素的抗氧化特性。微胶囊的尺寸范围为2.6至3.2微米。结果表明提取物中存在的酚类化合物起到有效的抗氧化剂作用。

https://cdn.ncbi.nlm.nih.gov/pmc/blobs/7091/10537477/7dc08d445551/polymers-15-03823-g001.jpg

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验