Evaluating low-cost monitoring designs for PM exposure assessment with a spatiotemporal modeling approach.

Determining the most feasible and cost-effective approaches to improving PM exposure assessment with low-cost monitors (LCMs) can considerably enhance the quality of its epidemiological inferences. We investigated features of fixed-site LCM designs that most impact PM exposure estimates to be used in long-term epidemiological inference for the Adult Changes in Thought Air Pollution (ACT-AP) study. We used ACT-AP collected and calibrated LCM PM measurements at the two-week level from April 2017 to September 2020 (N of monitors [measurements] = 82 [502]). We also acquired reference-grade PM measurements from January 2010 to September 2020 (N = 78 [6186]). We used a spatiotemporal modeling approach to predict PM exposures with either all LCM measurements or varying subsets with reduced temporal or spatial coverage. We evaluated the models based on a combination of cross-validation and external validation at locations of LCMs included in the models (N = 82), and also based on an independent external validation with a set of LCMs not used for the modeling (N = 30). We found that the model's performance declined substantially when LCM measurements were entirely excluded (spatiotemporal validation R [RMSE] = 0.69 [1.2 μg/m]) compared to the model with all LCM measurements (0.84 [0.9 μg/m]). Temporally, using the farthest apart measurements (i.e., the first and last) from each LCM resulted in the closest model's performance (0.79 [1.0 μg/m]) to the model with all LCM data. The models with only the first or last measurement had decreased performance (0.77 [1.1 μg/m]). Spatially, the model's performance decreased linearly to 0.74 (1.1 μg/m) when only 10% of LCMs were included. Our analysis also showed that LCMs located in densely populated, road-proximate areas improved the model more than those placed in moderately populated, road-distant areas.