Optimization of Enzymatic Transesterification of Acid Oil for Biodiesel Production Using a Low-Cost Lipase: The Effect of Transesterification Conditions and the Synergy of Lipases with Different Regioselectivity.

This study describes the enzymatic production of second-generation biodiesel using low-quality acid oil as a substrate. Biolipasa-R, a commercially available and low-cost lipase, was employed for enzymatic transesterification. Response surface methodology was applied to optimize the enzymatic transesterification process. The optimal conditions for biodiesel production, which comprised 42% lipase concentration (per weight of oil), 32% water content (per weight of oil), a methanol to oil molar ratio of 3:1, pH 7.0 and reaction temperature 30°C, resulted in the highest fatty acid methyl ester (FAME) content (71.3%). Subsequently, the synergistic effect of two lipases with different regioselectivities under the optimum transesterification conditions was studied, aiming at the enhancement of process efficiency. The transesterification efficiency of immobilized Biolipasa-R was determined and compared to that of Biolipasa-R in its free form. The results revealed a good performance on FAME content (66.5%), while the recycling of immobilized lipase resulted in a decrease in transesterification efficiency after three consecutive uses.