• 文献检索
  • 文档翻译
  • 深度研究
  • 学术资讯
  • Suppr Zotero 插件Zotero 插件
  • 邀请有礼
  • 套餐&价格
  • 历史记录
应用&插件
Suppr Zotero 插件Zotero 插件浏览器插件Mac 客户端Windows 客户端微信小程序
定价
高级版会员购买积分包购买API积分包
服务
文献检索文档翻译深度研究API 文档MCP 服务
关于我们
关于 Suppr公司介绍联系我们用户协议隐私条款
关注我们

Suppr 超能文献

核心技术专利:CN118964589B侵权必究
粤ICP备2023148730 号-1Suppr @ 2026

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验

用于3D打印的胶原-海藻酸盐生物墨水中人支气管上皮细胞相容性的实验研究

Experimental Study on Compatibility of Human Bronchial Epithelial Cells in Collagen-Alginate Bioink for 3D Printing.

作者信息

Rahman Taieba Tuba, Wood Nathan, Akib Yeasir Mohammad, Qin Hongmin, Pei Zhijian

机构信息

Department of Industrial & Systems Engineering, Texas A&M University, College Station, TX 77843, USA.

Department of Biology, Texas A&M University, College Station, TX 77843, USA.

出版信息

Bioengineering (Basel). 2024 Aug 23;11(9):862. doi: 10.3390/bioengineering11090862.

DOI:10.3390/bioengineering11090862
PMID:39329604
原文链接:https://pmc.ncbi.nlm.nih.gov/articles/PMC11429095/
Abstract

This paper reports an experimental study on the compatibility of human bronchial epithelial (HBE) cells in a collagen-alginate bioink. The compatibility was assessed using the culture well method with three bioink compositions prepared from a 10% alginate solution and neutralized TeloCol-10 mg/mL collagen stock solution. Cell viability, quantified by (live cell count-dead cell count)/live cell count within the HBE cell-laden hydrogel, was evaluated using the live/dead assay method from Day 0 to Day 6. Experimental results demonstrated that the collagen-alginate 4:1 bioink composition exhibited the highest cell viability on Day 6 (85%), outperforming the collagen-alginate 1:4 bioink composition and the alginate bioink composition, which showed cell viability of 75% and 45%, respectively. Additionally, the live cell count was highest for the collagen-alginate 4:1 bioink composition on Day 0, a trend that persisted through Days 1 to 6, underscoring its superior performance in maintaining cell viability and promoting cell proliferation. These findings show that the compatibility of HBE cells with the collagen-alginate 4:1 bioink composition was higher compared with the other two bioink compositions.

摘要

本文报道了一项关于人支气管上皮(HBE)细胞在胶原-海藻酸盐生物墨水体系中相容性的实验研究。采用培养孔法评估相容性,所用的三种生物墨水组合物由10%海藻酸盐溶液和中和后的TeloCol-10 mg/mL胶原储备溶液制备而成。通过活/死细胞检测法,在第0天至第6天评估负载HBE细胞的水凝胶中的细胞活力,细胞活力通过(活细胞数-死细胞数)/活细胞数进行量化。实验结果表明,胶原-海藻酸盐4:1生物墨水组合物在第6天表现出最高的细胞活力(85%),优于胶原-海藻酸盐1:4生物墨水组合物和海藻酸盐生物墨水组合物,后两者的细胞活力分别为75%和45%。此外,胶原-海藻酸盐4:1生物墨水组合物在第0天的活细胞数最高,这一趋势在第1天至第6天持续存在,突出了其在维持细胞活力和促进细胞增殖方面的优越性能。这些研究结果表明,与其他两种生物墨水组合物相比,HBE细胞与胶原-海藻酸盐4:1生物墨水组合物的相容性更高。

https://cdn.ncbi.nlm.nih.gov/pmc/blobs/22c4/11429095/fa56aa7a0719/bioengineering-11-00862-g006a.jpg
https://cdn.ncbi.nlm.nih.gov/pmc/blobs/22c4/11429095/01e928698f4b/bioengineering-11-00862-g001.jpg
https://cdn.ncbi.nlm.nih.gov/pmc/blobs/22c4/11429095/10afb869edcb/bioengineering-11-00862-g002.jpg
https://cdn.ncbi.nlm.nih.gov/pmc/blobs/22c4/11429095/6255ba4beea7/bioengineering-11-00862-g003.jpg
https://cdn.ncbi.nlm.nih.gov/pmc/blobs/22c4/11429095/0123eb22bd1f/bioengineering-11-00862-g004.jpg
https://cdn.ncbi.nlm.nih.gov/pmc/blobs/22c4/11429095/f7465e6dd841/bioengineering-11-00862-g005.jpg
https://cdn.ncbi.nlm.nih.gov/pmc/blobs/22c4/11429095/fa56aa7a0719/bioengineering-11-00862-g006a.jpg
https://cdn.ncbi.nlm.nih.gov/pmc/blobs/22c4/11429095/01e928698f4b/bioengineering-11-00862-g001.jpg
https://cdn.ncbi.nlm.nih.gov/pmc/blobs/22c4/11429095/10afb869edcb/bioengineering-11-00862-g002.jpg
https://cdn.ncbi.nlm.nih.gov/pmc/blobs/22c4/11429095/6255ba4beea7/bioengineering-11-00862-g003.jpg
https://cdn.ncbi.nlm.nih.gov/pmc/blobs/22c4/11429095/0123eb22bd1f/bioengineering-11-00862-g004.jpg
https://cdn.ncbi.nlm.nih.gov/pmc/blobs/22c4/11429095/f7465e6dd841/bioengineering-11-00862-g005.jpg
https://cdn.ncbi.nlm.nih.gov/pmc/blobs/22c4/11429095/fa56aa7a0719/bioengineering-11-00862-g006a.jpg

相似文献

1
Experimental Study on Compatibility of Human Bronchial Epithelial Cells in Collagen-Alginate Bioink for 3D Printing.用于3D打印的胶原-海藻酸盐生物墨水中人支气管上皮细胞相容性的实验研究
Bioengineering (Basel). 2024 Aug 23;11(9):862. doi: 10.3390/bioengineering11090862.
2
Effect of bioink properties on printability and cell viability for 3D bioplotting of embryonic stem cells.生物墨水特性对胚胎干细胞3D生物打印的可打印性和细胞活力的影响。
Biofabrication. 2016 Sep 16;8(3):035020. doi: 10.1088/1758-5090/8/3/035020.
3
A cell-printing approach for obtaining hASC-laden scaffolds by using a collagen/polyphenol bioink.一种通过使用胶原蛋白/多酚生物墨水来获得负载人脂肪干细胞支架的细胞打印方法。
Biofabrication. 2017 Apr 12;9(2):025004. doi: 10.1088/1758-5090/aa6997.
4
Strategy to Achieve Highly Porous/Biocompatible Macroscale Cell Blocks, Using a Collagen/Genipin-bioink and an Optimal 3D Printing Process.利用胶原/京尼平生物墨水和优化的 3D 打印工艺实现高多孔/生物相容性大体积细胞块的策略。
ACS Appl Mater Interfaces. 2016 Nov 30;8(47):32230-32240. doi: 10.1021/acsami.6b11669. Epub 2016 Nov 17.
5
A Three-Dimensional Bioprinted Copolymer Scaffold with Biocompatibility and Structural Integrity for Potential Tissue Regeneration Applications.一种具有生物相容性和结构完整性的三维生物打印共聚物支架,用于潜在的组织再生应用。
Polymers (Basel). 2022 Aug 21;14(16):3415. doi: 10.3390/polym14163415.
6
An Innovative Collagen-Based Cell-Printing Method for Obtaining Human Adipose Stem Cell-Laden Structures Consisting of Core-Sheath Structures for Tissue Engineering.一种创新的基于胶原蛋白的细胞打印方法,用于获得具有核壳结构的载有人脂肪干细胞的结构,用于组织工程。
Biomacromolecules. 2016 Apr 11;17(4):1365-75. doi: 10.1021/acs.biomac.5b01764. Epub 2016 Mar 25.
7
Marine Collagen-Based Bioink for 3D Bioprinting of a Bilayered Skin Model.用于双层皮肤模型3D生物打印的海洋胶原蛋白基生物墨水。
Pharmaceutics. 2023 Apr 24;15(5):1331. doi: 10.3390/pharmaceutics15051331.
8
Bone-derived dECM/alginate bioink for fabricating a 3D cell-laden mesh structure for bone tissue engineering.用于构建 3D 细胞载体网格结构的骨源性 dECM/藻酸盐生物墨水用于骨组织工程。
Carbohydr Polym. 2020 Dec 15;250:116914. doi: 10.1016/j.carbpol.2020.116914. Epub 2020 Aug 12.
9
pH Modification of High-Concentrated Collagen Bioinks as a Factor Affecting Cell Viability, Mechanical Properties, and Printability.高浓度胶原蛋白生物墨水的pH值调节作为影响细胞活力、力学性能和可打印性的一个因素
Gels. 2021 Dec 7;7(4):252. doi: 10.3390/gels7040252.
10
Alginate-Based Bioinks for 3D Bioprinting and Fabrication of Anatomically Accurate Bone Grafts.基于海藻酸盐的生物墨水用于 3D 生物打印和制造解剖学精确的骨移植物。
Tissue Eng Part A. 2021 Sep;27(17-18):1168-1181. doi: 10.1089/ten.TEA.2020.0305. Epub 2021 Feb 26.

引用本文的文献

1
Effects of Extrusion Pressure During 3D Printing on Viability of Human Bronchial Epithelial Cells in 3D Printed Samples.3D打印过程中的挤出压力对3D打印样品中人类支气管上皮细胞活力的影响。
Biomimetics (Basel). 2025 May 8;10(5):297. doi: 10.3390/biomimetics10050297.
2
Advances and Challenges in 3D Bioprinted Cancer Models: Opportunities for Personalized Medicine and Tissue Engineering.3D生物打印癌症模型的进展与挑战:个性化医学和组织工程的机遇
Polymers (Basel). 2025 Mar 31;17(7):948. doi: 10.3390/polym17070948.
3
Effects of Extreme Temperature on Human Bronchial Epithelial Cells in 3D Printed Samples.

本文引用的文献

1
Synthesis of Alginate/Collagen Bioink for Bioprinting Respiratory Tissue Models.用于生物打印呼吸组织模型的藻酸盐/胶原蛋白生物墨水的合成
J Funct Biomater. 2024 Apr 1;15(4):90. doi: 10.3390/jfb15040090.
2
Multilayer 3D bioprinting and complex mechanical properties of alginate-gelatin mesostructures.多层 3D 生物打印和藻酸盐-明胶介观结构的复杂机械性能。
Sci Rep. 2023 Jul 12;13(1):11253. doi: 10.1038/s41598-023-38323-2.
3
Biomaterials / bioinks and extrusion bioprinting.生物材料/生物墨水与挤出式生物打印
极端温度对3D打印样本中人类支气管上皮细胞的影响。
Bioengineering (Basel). 2024 Nov 28;11(12):1201. doi: 10.3390/bioengineering11121201.
4
Effects of Coaxial Nozzle's Inner Nozzle Diameter on Filament Strength and Gelation in Extrusion-Based 3D Printing with In Situ Ionic Crosslinking.同轴喷嘴内喷嘴直径对基于原位离子交联的挤出式3D打印中细丝强度和凝胶化的影响
Biomimetics (Basel). 2024 Sep 29;9(10):589. doi: 10.3390/biomimetics9100589.
Bioact Mater. 2023 Jun 27;28:511-536. doi: 10.1016/j.bioactmat.2023.06.006. eCollection 2023 Oct.
4
Global hotspots and emerging trends in 3D bioprinting research.3D生物打印研究的全球热点与新趋势
Front Bioeng Biotechnol. 2023 May 25;11:1169893. doi: 10.3389/fbioe.2023.1169893. eCollection 2023.
5
Characterization of Biocompatibility of Functional Bioinks for 3D Bioprinting.用于3D生物打印的功能性生物墨水的生物相容性表征
Bioengineering (Basel). 2023 Apr 9;10(4):457. doi: 10.3390/bioengineering10040457.
6
Three-Dimensional Bioprinting of an In Vitro Lung Model.三维生物打印体外肺模型。
Int J Mol Sci. 2023 Mar 19;24(6):5852. doi: 10.3390/ijms24065852.
7
Alternative lung cell model systems for toxicology testing strategies: Current knowledge and future outlook.用于毒理学测试策略的替代肺细胞模型系统:当前知识和未来展望。
Semin Cell Dev Biol. 2023 Sep 30;147:70-82. doi: 10.1016/j.semcdb.2022.12.006. Epub 2023 Jan 2.
8
A Comprehensive Review on Collagen Type I Development of Biomaterials for Tissue Engineering: From Biosynthesis to Bioscaffold.I型胶原蛋白用于组织工程的生物材料开发综述:从生物合成到生物支架
Biomedicines. 2022 Sep 16;10(9):2307. doi: 10.3390/biomedicines10092307.
9
The Effect of Agarose on 3D Bioprinting.琼脂糖对3D生物打印的影响。
Polymers (Basel). 2021 Nov 21;13(22):4028. doi: 10.3390/polym13224028.
10
3D Cell Culture Systems: Tumor Application, Advantages, and Disadvantages.3D 细胞培养系统:肿瘤应用、优势和劣势。
Int J Mol Sci. 2021 Nov 11;22(22):12200. doi: 10.3390/ijms222212200.