Suppr超能文献

在用于前交叉韧带重建的股四头肌肌腱移植生物力学模型中,连续锁边缝合法和锁式缝合法在3种缝合系统中的伸长率和断裂负荷相当。

Whipstitch and Locking Stitch Show Equivalent Elongation and Load to Failure Across 3 Suture Systems in a Biomechanical Model of Quadriceps Tendon Grafts for Anterior Cruciate Ligament Reconstruction.

作者信息

Diaz Miguel A, Branch Eric A, Dunn Jacob G, Brothers Anthony, Jordan Steve E

机构信息

Foundation for Orthopaedic Research & Education, Tampa, Florida.

Tallahassee Orthopedic Clinic, Panama City, Florida, U.S.A.

出版信息

Arthrosc Sports Med Rehabil. 2024 Jul 1;6(5):100968. doi: 10.1016/j.asmr.2024.100968. eCollection 2024 Oct.

Abstract

PURPOSE

To compare the biomechanical properties of quadriceps tendon (QT) graft stitch methods using 3 different suture systems for anterior cruciate ligament reconstruction.

METHODS

A total of 48 QTs were harvested from cadaveric knee specimens (age: 73 ± 7 years; range, 66-86 years). Samples were randomly divided into 3 groups where different suture needle systems were used to create 2 stitch methods: whipstitch (WS) and locking stitch (LS). Surgeons performed each technique to 5 stitches, each 0.5 cm apart. Stitching time was recorded. Samples were preconditioned and then underwent cyclic loading, followed by load to failure. Stiffness (N/mm), ultimate failure load (N), peak-to-peak displacement (mm), elongation (mm), and failure displacement (mm) were recorded.

RESULTS

WS and LS were equivalent across stiffness, ultimate load, and peak-to-peak displacement within groups 2 and 3. In group 1, the LS was stiffer than the WS, but the WS achieved a higher ultimate load. For all groups, the LS achieved lower elongation and failure displacement than the WS, with significant differences in groups 1 and 2. Within each stitching method, equivalence was determined for total elongation and ultimate failure load for all 3 suture system groups. For WS samples, group 1 all failed from suture breakage, and both groups 2 and 3 had instances of failure from suture pull-through. All LS samples failed from suture breakage.

CONCLUSIONS

Both LS and WS provide adequate mechanical properties in each of the 3 suture systems. Differences in performance do exist; however, each method shows equivalent total elongation and ultimate failure load for all 3 suture systems. LS may be preferred over WS due to lower mean elongation and failure displacement.

CLINICAL RELEVANCE

There is an increased use of QT grafts in for anterior cruciate ligament reconstruction. However, there have been a limited number of studies comparing various stitching methods and optimizing techniques for QT graft fixation. This study may provide important information to surgeons about which suture techniques have better biomechanical profiles.

摘要

目的

比较使用3种不同缝合系统对股四头肌肌腱(QT)移植物进行缝合的方法在前交叉韧带重建中的生物力学特性。

方法

从尸体膝关节标本(年龄:73±7岁;范围66 - 86岁)中获取48条QT。样本随机分为3组,使用不同的缝合针系统创建2种缝合方法:锁边缝合法(WS)和锁扣缝合法(LS)。外科医生对每种技术进行5针缝合,每针间隔0.5 cm。记录缝合时间。样本进行预处理后进行循环加载,然后加载至失效。记录刚度(N/mm)、极限失效载荷(N)、峰峰值位移(mm)、伸长率(mm)和失效位移(mm)。

结果

在第2组和第3组中,WS和LS在刚度、极限载荷和峰峰值位移方面相当。在第1组中,LS比WS更硬,但WS达到了更高的极限载荷。对于所有组,LS的伸长率和失效位移均低于WS,在第1组和第2组中有显著差异。在每种缝合方法中,确定了所有3个缝合系统组的总伸长率和极限失效载荷相当。对于WS样本,第1组均因缝线断裂而失效,第2组和第3组均有缝线拉出导致失效的情况。所有LS样本均因缝线断裂而失效。

结论

LS和WS在3种缝合系统中均提供了足够的力学性能。性能上确实存在差异;然而,每种方法在所有3种缝合系统中均显示出相当的总伸长率和极限失效载荷。由于平均伸长率和失效位移较低,LS可能比WS更受青睐。

临床意义

在进行前交叉韧带重建时,QT移植物的使用越来越多。然而,比较各种缝合方法和优化QT移植物固定技术的研究数量有限。本研究可能为外科医生提供重要信息,了解哪种缝合技术具有更好的生物力学特性。

https://cdn.ncbi.nlm.nih.gov/pmc/blobs/c5ea/11551357/d5b38aca3c98/gr1.jpg

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验