Johnson Madeline M, DeChellis Antonio, Nemmaru Bhargava, Chundawat Shishir P S, Lang Matthew J
Department of Chemical and Biomolecular Engineering, Vanderbilt University, Nashville, TN, 37235, USA.
Department of Chemical and Biochemical Engineering, Rutgers, The State University of New Jersey, 98 Brett Road, Piscataway, NJ, 08854, USA.
Biotechnol Biofuels Bioprod. 2024 Dec 4;17(1):140. doi: 10.1186/s13068-024-02588-0.
Cellulose, an abundant biopolymer, has great potential to be utilized as a renewable fuel feedstock through its enzymatic degradation into soluble sugars followed by sugar fermentation into liquid biofuels. However, crystalline cellulose is highly resistant to hydrolysis, thus industrial-scale production of cellulosic biofuels has been cost-prohibitive to date. Mechanistic studies of enzymes that break down cellulose, called cellulases, are necessary to improve and adapt such biocatalysts for implementation in biofuel production processes. Thermobifida fusca Cel6B (TfCel6B) is a promising candidate for industrial use due to its thermostability and insensitivity to pH changes. However, mechanistic studies probing TfCel6B hydrolytic activity have been limited to ensemble-scale measurements.
We utilized optical tweezers to perform single-molecule, nanometer-scale measurements of enzyme displacement during cellulose hydrolysis by TfCel6B. Records featured forward motility on the order of 0.17 nm s interrupted by backward motions and long pauses. Processive run lengths were on the order of 5 nm in both forward and backward directions. Motility records also showed rapid bidirectional displacements greater than 5 nm. Single-enzyme velocity and bulk ensemble activity were assayed on multiple crystalline cellulose allomorphs revealing that the degree of crystallinity and hydrogen bonding have disparate effects on the single-molecule level compared to the bulk scale. Additionally, we isolated and monitored the catalytic domain of TfCel6B and observed a reduction in velocity compared to the full-length enzyme that includes the carbohydrate-binding module. Applied force has little impact on enzyme velocity yet it readily facilitates dissociation from cellulose. Preliminary measurements at elevated temperatures indicated enzyme velocity strongly increases with temperature.
The unexpected motility patterns of TfCel6B are likely due to previously unknown mechanisms of processive cellulase motility implicating irregularities in cellulose substrate ultrastructure. While TfCel6B is processive, it has low motility at room temperature. Factors that most dramatically impact enzyme velocity are temperature and the presence of its native carbohydrate-binding module and linker. In contrast, substrate ultrastructure and applied force did not greatly impact velocity. These findings motivate further study of TfCel6B for its engineering and potential implementation in industrial processes.
纤维素是一种丰富的生物聚合物,通过酶促降解为可溶性糖,然后将糖发酵为液体生物燃料,具有作为可再生燃料原料的巨大潜力。然而,结晶纤维素对水解高度抗性,因此迄今为止纤维素生物燃料的工业规模生产成本过高。对分解纤维素的酶(称为纤维素酶)进行机理研究对于改进和调整此类生物催化剂以用于生物燃料生产过程是必要的。嗜热栖热放线菌Cel6B(TfCel6B)因其热稳定性和对pH变化不敏感而成为工业应用的有前途的候选者。然而,探究TfCel6B水解活性的机理研究仅限于整体规模的测量。
我们利用光镊对TfCel6B水解纤维素过程中的酶位移进行单分子、纳米级测量。记录显示向前运动速度约为0.17 nm/s,被向后运动和长时间停顿打断。向前和向后方向的连续运行长度约为5 nm。运动记录还显示了大于5 nm的快速双向位移。在多种结晶纤维素同质多形体上测定了单酶速度和整体活性,结果表明,与整体规模相比,结晶度和氢键在单分子水平上具有不同的影响。此外,我们分离并监测了TfCel6B的催化结构域,观察到与包含碳水化合物结合模块的全长酶相比速度降低。施加的力对酶速度影响很小,但很容易促进其与纤维素解离。在升高温度下的初步测量表明酶速度随温度强烈增加。
TfCel6B出人意料的运动模式可能是由于以前未知的连续纤维素酶运动机制,这暗示了纤维素底物超微结构的不规则性。虽然TfCel6B是连续的,但它在室温下运动性较低。最显著影响酶速度的因素是温度及其天然碳水化合物结合模块和连接子的存在。相比之下,底物超微结构和施加的力对速度影响不大。这些发现促使对TfCel6B进行进一步研究,以用于其工程设计和在工业过程中的潜在应用。