Liu Hao, Puiggalí-Jou Anna, Chansoria Parth, Janiak Jakub, Zenobi-Wong Marcy
Tissue Engineering + Biofabrication Laboratory, Department of Health Sciences & Technology, ETH Zurich, Otto-Stern-Weg 7, Zürich, 8093, Switzerland.
Mater Today Bio. 2025 Jan 11;31:101471. doi: 10.1016/j.mtbio.2025.101471. eCollection 2025 Apr.
Anisotropic scaffolds with unidirectionally aligned fibers present an optimal solution for nerve tissue engineering and graft repair. This study investigates the application of filamented light (FLight) biofabrication to create hydrogel matrices featuring highly aligned microfilaments, facilitating neurite guidance and outgrowth from encapsulated chicken dorsal root ganglion (DRG) cells. FLight employs optical modulation instability (OMI) to rapidly and safely (<5 s) fabricate hydrogel constructs with precise microfilament alignment. The tunability of FLight matrices was demonstrated by adjusting four key parameters: stiffness, porosity, growth factor release, and incorporation of biological cues. Matrix stiffness was fine-tuned by varying the projection light dose, yielding matrices with stiffness ranging from 0.6 to 5.7 kPa. Optimal neurite outgrowth occurred at a stiffness of 0.6 kPa, achieving an outgrowth of 2.5 mm over 4 days. Matrix porosity was modified using diffraction gratings in the optical setup. While significant differences in neurite outgrowth and alignment were observed between bulk and FLight gels, further increases in porosity from 40 % to 70 % enhanced cell migration and axon bundling without significantly affecting maximal outgrowth. The incorporation of protein microcrystals containing nerve growth factor (NGF) into the photoresin enabled sustained neurite outgrowth without the need for additional NGF in the media. Finally, laminin was added to the resin to enhance the bioactivity of the biomaterial, resulting in a further increase in maximum neurite outgrowth to 3.5 mm after 4 days of culture in softer matrices. Overall, the varied matrix properties achieved through FLight significantly enhance neurite outgrowth, highlighting the importance of adaptable scaffold characteristics for guiding neurite development. This demonstrates the potential of FLight as a versatile platform for creating ideal matrices for clinical applications in nerve repair and tissue engineering.
具有单向排列纤维的各向异性支架为神经组织工程和移植物修复提供了最佳解决方案。本研究探讨了丝状光(FLight)生物制造技术在创建具有高度排列微丝的水凝胶基质中的应用,以促进包裹在其中的鸡背根神经节(DRG)细胞的神经突引导和生长。FLight利用光学调制不稳定性(OMI)快速安全地(<5秒)制造具有精确微丝排列的水凝胶结构。通过调整四个关键参数证明了FLight基质的可调性:刚度、孔隙率、生长因子释放和生物信号的掺入。通过改变投射光剂量对基质刚度进行微调,得到刚度范围为0.6至5.7 kPa的基质。在刚度为0.6 kPa时神经突生长最佳,在4天内实现了2.5毫米的生长。在光学装置中使用衍射光栅改变基质孔隙率。虽然在整体凝胶和FLight凝胶之间观察到神经突生长和排列存在显著差异,但孔隙率从40%进一步增加到70%可增强细胞迁移和轴突成束,而不会显著影响最大生长。将含有神经生长因子(NGF)的蛋白质微晶掺入光树脂中可实现持续的神经突生长,而无需在培养基中添加额外的NGF。最后,将层粘连蛋白添加到树脂中以增强生物材料的生物活性,在较软基质中培养4天后,最大神经突生长进一步增加到3.5毫米。总体而言,通过FLight实现的各种基质特性显著增强了神经突生长,突出了适应性支架特性对引导神经突发育的重要性。这证明了FLight作为一个通用平台在创建用于神经修复和组织工程临床应用的理想基质方面的潜力。