Yang Liye, Hosokawa Yoichiroh, Li Ming, Tsuri Yuka, Cheng Shaokoon, Yalikun Yaxiaer
Division of Materials Science, Graduate School of Science and Technology, Nara Institute of Science and Technology, Ikoma 630-0192, Japan.
School of Engineering, Macquarie University, Sydney, NSW 2109, Australia.
ACS Omega. 2025 Jun 23;10(27):28857-28865. doi: 10.1021/acsomega.4c11633. eCollection 2025 Jul 15.
Femtosecond laser-induced crystallization has gained significant attention due to its precise control over crystal formation in recent years; however, challenges remain in improving the efficiency and consistency of this process. Another emerging approach for crystallization is the use of microfluidic systems, where strategies such as solvent exchange, temperature modulation, and evaporation have been explored; however, achieving consistent and localized nucleation remains an active area of investigation. In this study, the probability of crystal enhancement through the integration of femtosecond laser-induced crystallization with microfluidic chip technology was investigated. A microfluidic device with a channel width of 3 mm, capable of continuous femtosecond laser pulse irradiation, was designed to control crystal number and size growth under a controlled flow rate. Sequentially, tunable crystal generation in the microfluidic chip was realized by irradiating the channel with femtosecond laser pulse supersaturated sodium chlorate (NaClO) solution as low threshold as σ = 0.002. The size and number of crystals could be tuned by the supersaturation and flow rate of the sample solution, the laser pulse energy, and the number of laser pulses.
近年来,飞秒激光诱导结晶因其对晶体形成的精确控制而备受关注;然而,在提高该过程的效率和一致性方面仍存在挑战。另一种新兴的结晶方法是使用微流体系统,其中已经探索了诸如溶剂交换、温度调节和蒸发等策略;然而,实现一致且局部的成核仍然是一个活跃的研究领域。在本研究中,研究了通过将飞秒激光诱导结晶与微流体芯片技术相结合来提高晶体生长的可能性。设计了一种通道宽度为3毫米、能够进行连续飞秒激光脉冲照射的微流体装置,以在可控流速下控制晶体数量和尺寸的增长。随后,通过用飞秒激光脉冲照射通道,在低至σ = 0.002的过饱和氯酸钠(NaClO)溶液中实现了微流体芯片中可调谐的晶体生成。晶体的尺寸和数量可以通过样品溶液的过饱和度和流速、激光脉冲能量以及激光脉冲数量来调节。