Suppr超能文献

微流控激光诱导掺杂氧化铁纳米颗粒的过饱和氯化钾水溶液成核

Microfluidic Laser-Induced Nucleation of Iron (II,III) Oxide Nanoparticle-Doped Supersaturated Aqueous KCl Solutions.

作者信息

Ndukwe-Ajala Kelechi F, Sabirin Jasmin M, Garetz Bruce A, Hartman Ryan L

机构信息

Department of Chemical and Biomolecular Engineering, NYU Tandon School of Engineering, Brooklyn, New York 11201, United States.

出版信息

Cryst Growth Des. 2024 Sep 28;24(20):8370-8380. doi: 10.1021/acs.cgd.4c00885. eCollection 2024 Oct 16.

Abstract

A capillary-based microfluidic system designed for nonphotochemical laser-induced nucleation (NPLIN) studies coupled with real-time microscopy was used to study NPLIN of iron (II,III) oxide doped aqueous KCl solutions. Supersaturation was achieved by lowering the solution temperature using thermoelectric cooling, and heating was used for the dissolution of crystals downstream to prevent clogging during the flow. The effect of nanoparticle concentration, supersaturation, laser intensity, and filtration was studied. We report laser-induced nucleation using laser intensities as low as 1 MW/cm with nanoparticle number densities of ∼10 particles per mL of solution at KCl supersaturations from 1.06 to 1.08. The number of crystals increased with increasing laser intensity, supersaturation, and nanoparticle concentration. We discuss our results with respect to the colloidal impurity-heating mechanism hypothesis and propose a semiempirical model based on the nanoparticle heating and bubble formation due to the absorption of laser energy.

摘要

一种基于毛细管的微流体系统,专为非光化学激光诱导成核(NPLIN)研究与实时显微镜相结合而设计,用于研究掺杂铁(II,III)氧化物的KCl水溶液的NPLIN。通过热电冷却降低溶液温度来实现过饱和,加热用于溶解下游的晶体以防止流动过程中堵塞。研究了纳米颗粒浓度、过饱和度、激光强度和过滤的影响。我们报告了在KCl过饱和度为1.06至1.08时,使用低至1 MW/cm的激光强度和每毫升溶液约10个颗粒的纳米颗粒数密度进行激光诱导成核。晶体数量随着激光强度、过饱和度和纳米颗粒浓度的增加而增加。我们根据胶体杂质加热机制假说讨论了我们的结果,并基于纳米颗粒吸收激光能量导致的加热和气泡形成提出了一个半经验模型。

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验