Artun J, Bergland S
Am J Orthod. 1984 Apr;85(4):333-40. doi: 10.1016/0002-9416(84)90190-8.
It has been claimed that different ion solutions containing sulfate induce crystal growth and might be a better alternative than conventional acid etching for enamel pretreatment in bracket bonding. It should thus combine optimal bond strength with easy and quick debonding. Two clinical experiments were performed to test this hypothesis. The first experiment dealt with the debonding procedure. Following conditioning with dilute sulfuric acid which contained sodium sulfate (to be termed solution A) on one side of the mouth and etching with 37% phosphoric acid on the other, brackets were bonded on the maxillary and mandibular incisors of twenty dental nurse students. Debracketing and a subsequent cleanup procedure were performed after 2 days. The mode of loosening was mainly between the enamel surface and adhesive on the crystal-growth-conditioned teeth and between the bracket mesh and adhesive on the teeth etched with phosphoric acid. This difference in mode of loosening was statistically significant (P less than 0.001). In the second experiment, which dealt with the clinical bond strength, 250 brackets were bonded in forty patients. One side served as a control and was conventionally acid etched. On the experimental side conditioning was done with solution A in thirty patients. In ten patients, 10% phosphoric acid was added to the dilute sulfuric acid used (to be termed solution B). Failure rates and modes of failure were recorded for a 6-month period.(ABSTRACT TRUNCATED AT 250 WORDS)
据称,含硫酸盐的不同离子溶液可诱导晶体生长,对于托槽粘结中的牙釉质预处理而言,可能是比传统酸蚀更好的选择。因此,它应兼具最佳粘结强度以及简便快速的脱粘效果。进行了两项临床实验来验证这一假设。第一项实验涉及脱粘过程。在口腔一侧用含硫酸钠的稀硫酸(称为溶液A)进行预处理,另一侧用37%的磷酸进行酸蚀后,在20名牙科护理专业学生的上颌和下颌切牙上粘结托槽。2天后进行托槽拆除及后续清理程序。晶体生长预处理牙齿上的脱粘模式主要发生在牙釉质表面与粘合剂之间,而磷酸酸蚀牙齿上的脱粘模式主要发生在托槽网与粘合剂之间。这种脱粘模式的差异具有统计学意义(P小于0.001)。在第二项实验中,涉及临床粘结强度,在40名患者中粘结了250个托槽。一侧作为对照,采用传统酸蚀。在实验侧,30名患者用溶液A进行预处理。在10名患者中,向所用的稀硫酸中添加了10%的磷酸(称为溶液B)。记录6个月期间的失败率和失败模式。(摘要截选于250字)