Rose R C, Koch M J
Anal Biochem. 1984 Nov 15;143(1):21-4. doi: 10.1016/0003-2697(84)90551-7.
Quantitation of ascorbate at concentrations normally found in biological samples and foods has previously been shown to be possible by HPLC analysis. Prefilled amine columns from three manufacturers were presently used to evaluate their potential for separating low concentrations of [14C]ascorbic acid from its degradation products, [14C]dehydroascorbic acid and [14C]diketogulonic acid. A successful separation was achieved on some columns with as little as 200 cpm (30 pmol) of total ascorbate injected. On other columns, injection of 30-500 pmol of ascorbate resulted in as much as 80% of [14C]ascorbic acid eluting with an unpredictable retention time. In these instances the inclusion of nonlabeled ascorbic acid (0.5 mg/ml) to the sample resulted in most of the [14C]ascorbic acid activity eluting at the expected retention time of ascorbic acid. The inclusion of ascorbic acid in samples injected onto the column also resulted in a more discrete peak in the elution of dehydroascorbic acid, and more complete recovery of the total [14C]activity (ascorbic acid, dehydroascorbic acid, and diketogulonic acid) injected onto the column.
此前已证明,通过高效液相色谱(HPLC)分析可以对生物样品和食物中常见浓度的抗坏血酸进行定量分析。目前使用了来自三家制造商的预填充胺柱,以评估其从降解产物[14C]脱氢抗坏血酸和[14C]二酮古洛糖酸中分离低浓度[14C]抗坏血酸的潜力。在一些柱子上,注入低至200 cpm(30 pmol)的总抗坏血酸即可成功实现分离。在其他柱子上,注入30 - 500 pmol的抗坏血酸会导致高达80%的[14C]抗坏血酸以不可预测的保留时间洗脱。在这些情况下,向样品中加入未标记的抗坏血酸(0.5 mg/ml)会使大部分[14C]抗坏血酸活性在抗坏血酸预期的保留时间洗脱。向注入柱子的样品中加入抗坏血酸还会使脱氢抗坏血酸洗脱峰更加离散,并使注入柱子的总[14C]活性(抗坏血酸、脱氢抗坏血酸和二酮古洛糖酸)的回收率更高。