Brewster L, Mohan R, Mageras G, Burman C, Leibel S, Fuks Z
Department of Radiation Oncology, Long Island Jewish Medical Center, New Hyde Park, NY, USA.
Int J Radiat Oncol Biol Phys. 1995 Dec 1;33(5):1081-9. doi: 10.1016/0360-3016(95)02061-6.
Three dimensional conformal radiation treatments are complex, often involving large numbers of blocked or multileaf collimated fields that shape regions of high dose to conform to the treatment volume. As manual definition and digitization of aperture shapes and their corresponding multileaf configurations can be impractically time consuming, it was necessary to integrate the planning of multileaf fields into an existing three dimensional treatment planning system and improve the efficiency of treatment delivery to make these treatments feasible on a routine basis.
A subfunction of the Beam's Eye View (BEV) component can be used to automatically generate a continuous aperture shape with a margin around the tumor to account for beam penumbra, and excluding any normal structures to be spared (each with its own margin). To convert a continuous aperture shape into one defined by the multileaf collimator (MLC), a leaf coverage mode is chosen to determine how leaves are fitted to aperture shapes. The conversion process also considers parameters of the specific MLC system, e.g., leaf thickness and the number of leaves. If normal structures to be shielded split the target into multiple regions, more than one multileaf aperture can result. An interactive leaf adjustment routine is also provided to allow for modification of individual leaf positions. Dose calculation programs then take into account multileaf apertures for computation of dose distributions using a pencil beam convolution model. Finally, prescription files specifying leaf and jaw configurations are prepared in treatment machine specific formats and downloaded to the computers driving the multileaf collimators and other components of the treatment machines.
An example is presented of a prostate treatment plan, with MLC configurations, dose distributions, and treatment delivery description, along with discussion of clinical implementation at Memorial Hospital.
三维适形放射治疗很复杂,通常涉及大量的挡块或多叶准直野,这些野形成高剂量区域以符合治疗体积。由于手动定义和数字化孔径形状及其相应的多叶配置非常耗时,因此有必要将多叶野的计划整合到现有的三维治疗计划系统中,并提高治疗实施的效率,以使这些治疗在常规情况下可行。
射野视观(BEV)组件的一个子功能可用于自动生成围绕肿瘤的带有边缘的连续孔径形状,以考虑射束半值层,并排除任何需要保护的正常结构(每个结构都有其自身的边缘)。为了将连续孔径形状转换为由多叶准直器(MLC)定义的形状,选择一种叶片覆盖模式来确定叶片如何适配孔径形状。转换过程还考虑特定MLC系统的参数,例如叶片厚度和叶片数量。如果要屏蔽的正常结构将靶区分割成多个区域,则可能会产生多个多叶孔径。还提供了一个交互式叶片调整程序,以允许修改单个叶片的位置。剂量计算程序然后考虑多叶孔径,使用笔形束卷积模型计算剂量分布。最后,以治疗机特定格式准备指定叶片和准直器配置的处方文件,并下载到驱动多叶准直器和治疗机其他组件的计算机中。
给出了一个前列腺治疗计划的示例,包括MLC配置、剂量分布和治疗实施描述,以及纪念医院的临床实施讨论。