A precision cranial immobilization system for conformal stereotactic fractionated radiation therapy.

PURPOSE

Conformal radiotherapy has been shown to benefit from precision alignment of patient target to therapy beam (1, 6, 13). This work describes an optimized immobilization system for the fractionated treatment of intracranial targets. A study of patient motion demonstrates the high degree of immobilization which is available.

METHODS AND MATERIALS

A system using dental fixation and a thermoplastic mask that relocates on a rigid frame is described. The design permits scanning studies using computed tomography (CT) and magnetic resonance imaging (MR), conventional photon radiotherapy, and high precision stereotactic proton radiotherapy to be performed with minimal repositioning variation. Studies of both intratreatment motion and daily setup reliability are performed on patients under treatment for paranasal sinus carcinoma. Multiple radiographs taken during single treatments provide the basis for a three-dimensional (3D) motion analysis. Additionally, studies of orthogonal radiographs used to setup for proton treatments and verification port films from photon treatments are used to establish day to day patient position variation in routine use.

RESULTS

Net 3D patient motion during any treatment is measured to be 0.9 +/- 0.4 mm [mean +/- standard deviation (SD)] and rotation about any body axis is 0.14 +/- 0.67 degrees (mean +/- SD). Day-to-day setup accuracy to laser marks is limited to 2.3 mm (mean) systematic error and 1.6 mm (mean) random error.

CONCLUSION

We conclude that the most stringent immobilization requirements of 3D conformal radiotherapy adjacent to critical normal structures can be met with a high precision system such as the one described here. Without the use of pretreatment verification, additional developments in machine and couch design are needed to assure that patient repositioning accuracy is comparable to the best level of patient immobility achievable.