Coleman R
Division of Morphological Sciences, Bruce Rappaport Faculty of Medicine, Technion-Israel Institute of Technology, Haifa.
Anat Rec. 1995 Dec;243(4):531-3. doi: 10.1002/ar.1092430417.
A method is described in which formaldehyde levels are greatly reduced in our gross anatomy laboratory in order to comply with increasingly severe safety and health regulations.
A novel type of dissection "bed" has been introduced which incorporates an internal motor that causes a downflow of formaldehyde-rich vapors, which are absorbed by a replaceable active carbon filtration system.
Use of the new dissection "beds" has resulted in the recirculated air being virtually formaldehyde-free. Formaldehyde vapor levels in our gross anatomy laboratory have been greatly reduced and are typically in the range of 0.03-0.09 ppm.
The new system allows us to comply with safety and health regulations and provide a dissection room with an excellent working environment.
本文描述了一种方法，通过该方法可在我们的大体解剖实验室中大幅降低甲醛水平，以符合日益严格的安全与健康法规。
引入了一种新型解剖“床”，其内置一个马达，可使富含甲醛的蒸汽向下流动，这些蒸汽被一个可更换的活性炭过滤系统吸收。
使用新的解剖“床”使得再循环空气几乎不含甲醛。我们大体解剖实验室中的甲醛蒸汽水平已大幅降低，通常在0.03 - 0.09 ppm范围内。
新系统使我们能够符合安全与健康法规，并为解剖室提供一个极佳的工作环境。
