Squid giant axons. A model for the neuron soma?

Insertion of electrically floating wires along the axis of a squid giant axon produces an apparent increase in diameter in the region where the wire surface has been treated to give it a low resistance. The shape of action potentials propagating into this region depend upon the surface resistance (and the length) of the wire. As this segment's internal resistance is lowered by reducing the wire's surface resistance, the following characteristic sequence of changes in the action potential is seen at the transition region: (a) the duration increases; (b) two peaks develop, the first one generated in the normal axon region and the second one generated later in the axial wire region, and; (c) blockage occurs (for a very low resistance wire). Action potentials recorded at the membrane region near the tip of the axial wire in (b) resemble those recorded at the initial segment of neurons upon antidromic invasions. Squid axon action potentials propagated from a normal region into that containing the low resistance wire also resemble antidromic invasions recorded in neuron somas. Hyperpolarizing current pulses applied through the wire act as if the wire surface resistance was momentarily reduced. For example, the two components of the action potential recorded at the axial wire membrane region noted in (b) can be sequentially blocked by the application of increasing hyperpolarizing current through the wire. Similar effects are seen when hyperpolarizing currents are injected into motoneuron somas. It is concluded that the geometrical properties of the junction of a neuron axon with its soma may be in themselves sufficient to determine the shape of the action potentials usually recorded by microelectrodes.