Morais S, Sousa J P, Fernandes M H, Carvalho G S
INEB--Instituto de Engenharia Biomédica, Departamento de Engenharia Química/Faculdade de Engenharia da Universidade do Porto, Portugal.
Biomaterials. 1998 Jan-Feb;19(1-3):13-21. doi: 10.1016/s0142-9612(97)00149-x.
The cytocompatibility of stainless steel 316L (SS 316L) corrosion products was investigated with particular focus on the dose- and time-effect of electrochemically dissolved SS and the corresponding separate metal ions on osteogenic bone marrow derived cells. Type AISI 316L stainless steel (Fe 63.9%, Cr 18.0%, Ni 12.5%, Mo 2.8%, Si 1.2%, Mn 1.6% and C 0.025%, weight for weight) was anodically dissolved in Hank's Balanced Salt Solution (HBSS) and diluted to the following concentrations: 500 microg ml(-1) of Fe, 122 microg ml(-1) of Cr and 101 microg ml(-1) of Ni, as estimated by atomic absorption spectrometry. Similarly, salt solutions containing 50 microg ml(-1) of Fe (FeCl3 x 6H2O), 122 microg ml(-1) of Cr (CrCl3 x 6H2O) or 101 microg ml(-1) of Ni (NiNO3) were prepared. All solutions were diluted 1:10(3), 1:10(4) and 1:10(5) and their effects on cell proliferation and function of rabbit bone marrow cells were studied up to 28 days of culture. Bone marrow cells (second subculture) were cultured in alpha-Minimal Essential Medium (alpha-MEM) supplemented with 10% fetal bovine serum 10(-8) mol l(-1) dexamethasone, 2.52 x 10(-4) mol l(-1) ascorbic acid and 10(-2) mol l(-1) beta-glycerophosphate. The osteoblast response to the presence of metal ions was evaluated by biochemical assays (enzymatic reduction of MTT for evaluation of cell viability/proliferation, and estimation of alkaline phosphatase (ALP) activity) and histochemical assays (identification of ALP positive cells and calcium and phosphates deposits). Results suggest a decrease in the expression of the osteoblast phenotype in the presence of ion and alloy solutions. Stainless steel corrosion products elicited slight effects but the corresponding metal ions produced pronounced effects on the osteoblast phenotype, namely an alteration in the levels and temporal expression of ALP and lower and retarded tissue mineralization ability.
研究了316L不锈钢(SS 316L)腐蚀产物的细胞相容性,特别关注电化学溶解的SS及其相应的单独金属离子对成骨骨髓来源细胞的剂量和时间效应。AISI 316L型不锈钢(铁63.9%、铬18.0%、镍12.5%、钼2.8%、硅1.2%、锰1.6%、碳0.025%,重量比)在汉克斯平衡盐溶液(HBSS)中进行阳极溶解,并稀释至以下浓度:通过原子吸收光谱法估计,铁为500μg/ml,铬为122μg/ml,镍为101μg/ml。同样,制备了分别含有50μg/ml铁(FeCl3·6H2O)、122μg/ml铬(CrCl3·6H2O)或101μg/ml镍(NiNO3)的盐溶液。所有溶液均稀释1:10³、1:10⁴和1:10⁵,并在长达28天的培养过程中研究它们对兔骨髓细胞增殖和功能的影响。骨髓细胞(第二代传代培养)在补充有10%胎牛血清、10⁻⁸mol/L地塞米松、2.52×10⁻⁴mol/L抗坏血酸和10⁻²mol/Lβ-甘油磷酸的α-最低必需培养基(α-MEM)中培养。通过生化测定(MTT的酶促还原以评估细胞活力/增殖,以及碱性磷酸酶(ALP)活性的测定)和组织化学测定(鉴定ALP阳性细胞以及钙和磷酸盐沉积)来评估成骨细胞对金属离子存在的反应。结果表明,在离子和合金溶液存在的情况下,成骨细胞表型的表达会降低。不锈钢腐蚀产物产生的影响较小,但相应的金属离子对成骨细胞表型产生了显著影响,即ALP水平和时间表达发生改变,以及组织矿化能力降低和延迟。