Hill D L, Maurer C R, Maciunas R J, Barwise J A, Fitzpatrick J M, Wang M Y
Division of Radiological Sciences and Medical Engineering, Guy's Hospital School of Medicine, London, England.
Neurosurgery. 1998 Sep;43(3):514-26; discussion 527-8. doi: 10.1097/00006123-199809000-00066.
Several causes of spatial inaccuracies in image-guided surgery have been carefully studied and documented for several systems. These include error in identifying the external features used for registration, geometrical distortion in the preoperative images, and error in tracking the surgical instruments. Another potentially important source of error is brain deformation between the time of imaging and the time of surgery or during surgery. In this study, we measured the deformation of the dura and brain surfaces between the time of imaging and the start of surgical resection for 21 patients.
All patients underwent intraoperative functional mapping, allowing us to measure brain surface motion at two times that were separated by nearly an hour after opening the dura but before performing resection. The positions of the dura and brain surfaces were recorded and transformed to the coordinate space of a preoperative magnetic resonance image, using the Acustar surgical navigation system (manufactured by Johnson & Johnson Professional, Inc., Randolph, MA) (the Acustar trademark and associated intellectual property rights are now owned by Picker International, Highland Heights, OH). This system performs image registration with bone-implanted markers and tracks a surgical probe by optical triangulation.
The mean displacements of the dura and the first and second brain surfaces were 1.2, 4.4, and 5.6 mm, respectively, with corresponding mean volume reductions under the craniotomy of 6, 22, and 29 cc. The maximum displacement was greater than 10 mm in approximately one-third of the patients for the first brain surface measurement and one-half of the patients for the second. In all cases, the direction of brain shift corresponded to a "sinking" of the brain intraoperatively, compared with its preoperative position. Analysis of the measurement error revealed that its magnitude was approximately 1 to 2 mm. We observed two different patterns of the brain surface deformation field, depending on the inclination of the craniotomy with respect to gravity. Separate measurements of brain deformation within the closed cranium caused by changes in patient head orientation with respect to gravity suggested that less than 1 mm of the brain shift recorded intraoperatively could have resulted from the change in patient orientation between the time of imaging and the time of surgery.
These results suggest that intraoperative brain deformation is an important source of error that needs to be considered when using surgical navigation systems.
针对多个系统,已对图像引导手术中空间不准确的多种原因进行了仔细研究并记录在案。这些原因包括用于配准的外部特征识别误差、术前图像中的几何变形以及手术器械跟踪误差。另一个潜在的重要误差来源是成像时与手术时之间或手术过程中大脑的变形。在本研究中,我们测量了21例患者成像时与手术切除开始时之间硬脑膜和脑表面的变形情况。
所有患者均接受术中功能图谱绘制,这使我们能够在打开硬脑膜后但在进行切除前相隔近一小时的两个时间点测量脑表面运动。使用Acustar手术导航系统(由强生专业公司制造,马萨诸塞州伦道夫)(Acustar商标及相关知识产权现归Picker International所有,俄亥俄州高地 Heights)记录硬脑膜和脑表面的位置,并将其转换到术前磁共振图像的坐标空间。该系统通过骨植入标记进行图像配准,并通过光学三角测量法跟踪手术探针。
硬脑膜以及第一和第二脑表面的平均位移分别为1.2、4.4和5.6毫米,相应的开颅手术下平均体积减少量分别为6、22和29立方厘米。在约三分之一的患者中,第一次脑表面测量的最大位移大于10毫米,在约一半的患者中,第二次脑表面测量的最大位移大于10毫米。在所有病例中,与术前位置相比,术中脑移位方向对应于脑的“下沉”。测量误差分析显示其大小约为1至2毫米。根据开颅手术相对于重力的倾斜度,我们观察到脑表面变形场有两种不同模式。对因患者头部相对于重力的方向变化而导致的闭合颅骨内脑变形的单独测量表明,术中记录的脑移位中小于1毫米可能是由于成像时与手术时之间患者方向的变化所致。
这些结果表明,术中脑变形是使用手术导航系统时需要考虑的一个重要误差来源。