Chang J H, Chang Y K, Ryu H W, Chang H N
Department of Chemical Engineering and BioProcess Engineering Research Center, Korea Advanced Institute of Science and Technology, 373-1, Kusong-dong, Yusong-gu, Taejon, South Korea.
FEMS Microbiol Lett. 2000 Jan 15;182(2):309-12. doi: 10.1111/j.1574-6968.2000.tb08913.x.
Desulfurizations of a model oil (hexadecane containing dibenzothiophene (DBT)) and a diesel oil by immobilized DBT-desulfurizing bacterial strains, Gordona sp. CYKS1 and Nocardia sp. CYKS2, were carried out. Celite bead was used as a biosupport for cell immobilization. Seven-eight cycles of repeated-batch desulfurization were conducted for each strain. Each batch reaction was carried out for 24 h. In the case of model oil treatment with strain CYKS1, about 4.0 mM of DBT in hexadecane (0.13 g sulfur l(oil)(-1)) was desulfurized during the first batch, while 0.25 g sulfur l(oil)(-1) during the final eighth batch. The mean desulfurization rate increased from 0.24 for the first batch to 0.48 mg sulfur l(dispersion)(-1) h(-1) for the final batch. The sulfur content in the light gas oil was decreased from 3 to 2.1 g l(oil)(-1) by strain CYKS1 in the first batch. The mean desulfurization rate was 1.81 mg sulfur l(dispersion)(-1) h(-1), which decreased slightly when the batch reaction was repeated. No significant changes in desulfurization rate were observed with strain CYKS2 when the batch reaction was repeated. When the immobilized cells were stored at 4 degrees C in 0.1 M phosphate buffer (pH 7.0) for 10 days, the residual desulfurization activity was about 50 approximately 70% of the initial value.
采用固定化二苯并噻吩脱硫细菌菌株戈登氏菌CYKS1和诺卡氏菌CYKS2对模拟油(含二苯并噻吩(DBT)的十六烷)和柴油进行脱硫。用硅藻土珠作为细胞固定化的生物载体。对每个菌株进行了7 - 8个循环的重复分批脱硫。每个批次反应进行24小时。在用菌株CYKS1处理模拟油的情况下,第一批反应中十六烷中约4.0 mM的DBT(0.13 g硫l(油)(-1))被脱硫,而在最后第八批反应中为0.25 g硫l(油)(-1)。平均脱硫速率从第一批的0.24增加到最后一批的0.48 mg硫l(分散体)(-1) h(-1)。在第一批反应中,菌株CYKS1使轻质瓦斯油中的硫含量从3 g l(油)(-1)降至2.1 g l(油)(-1)。平均脱硫速率为1.81 mg硫l(分散体)(-1) h(-1),当重复批次反应时略有下降。当重复批次反应时,未观察到菌株CYKS2的脱硫速率有显著变化。当固定化细胞在0.1 M磷酸盐缓冲液(pH 7.0)中于4℃保存10天时,残留脱硫活性约为初始值的50%至70%。