Patterning enzymes inside microfluidic channels via photoattachment chemistry.

We have developed a general method for photopatterning well-defined patches of enzymes inside a microfluidic device at any location. First, a passivating protein layer was adsorbed to the walls and floor of a poly(dimethylsiloxane)/glass microchannel. The channel was then filled with an aqueous biotin-linked dye solution. Using an Ar+/Kr+ laser, the fluorophore moieties were bleached to create highly reactive species. These activated molecules subsequently attached themselves to the adsorbed proteins on the microchannel walls and floor via a singlet oxygen-dependent mechanism. Enzymes linked to streptavidin or avidin could then be immobilized via (strept)avidin/biotin binding. Using this process, we were able to pattern multiple patches of streptavidin-linked alkaline phosphatase inside a straight microfluidic channel without the use of valves under exclusively aqueous conditions. The density of alkaline phosphatase in the patches was calculated to be approximately 5% of the maximum possible density by comparison with known standards. Turnover was observed via fluorogenic substrate conversion and fluorescence microscopy. A more complex two-step enzyme reaction was also designed. In this case, avidin-linked glucose oxidase and streptavidin-linked horseradish peroxidase were sequentially patterned in separate patches inside straight microfluidic channels. Product formed at the glucose oxidase patch became the substrate for horseradish peroxidase, patterned downstream, where fluorogenic substrate turnover was recorded.