Suppr超能文献

通过化学表面图案化实现肌动球蛋白运动功能的选择性空间定位。

Selective spatial localization of actomyosin motor function by chemical surface patterning.

作者信息

Sundberg Mark, Balaz Martina, Bunk Richard, Rosengren-Holmberg Jenny P, Montelius Lars, Nicholls Ian A, Omling Pär, Tågerud Sven, Månsson Alf

机构信息

Department of Chemistry and Biomedical Sciences, University of Kalmar, SE-39182 Kalmar, Sweden.

出版信息

Langmuir. 2006 Aug 15;22(17):7302-12. doi: 10.1021/la060365i.

Abstract

We have previously described the efficient guidance and unidirectional sliding of actin filaments along nanosized tracks with adsorbed heavy meromyosin (HMM; myosin II motor fragment). In those experiments, the tracks were functionalized with trimethylchlorosilane (TMCS) by chemical vapor deposition (CVD) and surrounded by hydrophilic areas. Here we first show, using in vitro motility assays on nonpatterned and micropatterned surfaces, that the quality of HMM function on CVD-TMCS is equivalent to that on standard nitrocellulose substrates. We further examine the influences of physical properties of different surfaces (glass, SiO(2), and TMCS) and chemical properties of the buffer solution on motility. With the presence of methylcellulose in the assay solution, there was HMM-induced actin filament sliding on both glass/SiO(2) and on TMCS, but the velocity was higher on TMCS. This difference in velocity increased with decreasing contact angles of the glass and SiO(2) surfaces in the range of 20-67 degrees (advancing contact angles for water droplets). The corresponding contact angle of CVD-TMCS was 81 degrees. In the absence of methylcellulose, there was high-quality motility on TMCS but no motility on glass/SiO(2). This observation was independent of the contact angle of the glass/SiO(2) surfaces and of HMM incubation concentrations (30-150 microg mL(-)(1)) and ionic strengths of the assay solution (20-50 mM). Complete motility selectivity between TMCS and SiO(2) was observed for both nonpatterned and for micro- and nanopatterned surfaces. Spectrophotometric analysis of HMM depletion during incubation, K/EDTA ATPase measurements, and total internal reflection fluorescence spectroscopy of HMM binding showed only minor differences in HMM surface densities between TMCS and SiO(2)/glass. Thus, the motility contrast between the two surface chemistries seems to be attributable to different modes of HMM binding with the hindrance of actin binding on SiO(2)/glass.

摘要

我们之前描述过肌动蛋白丝沿着吸附有重酶解肌球蛋白(HMM;肌球蛋白II运动片段)的纳米级轨道进行高效引导和单向滑动。在那些实验中,通过化学气相沉积(CVD)用三甲基氯硅烷(TMCS)对轨道进行功能化处理,并使其被亲水区域包围。在此,我们首先通过在无图案和微图案化表面上进行体外运动分析表明,CVD - TMCS上HMM的功能质量与标准硝酸纤维素底物上的相当。我们进一步研究了不同表面(玻璃、SiO₂和TMCS)的物理性质以及缓冲溶液的化学性质对运动性的影响。在测定溶液中存在甲基纤维素的情况下,HMM能诱导肌动蛋白丝在玻璃/SiO₂和TMCS上滑动,但在TMCS上的速度更高。随着玻璃和SiO₂表面接触角在20 - 67度范围内减小(水滴的前进接触角),这种速度差异增大。CVD - TMCS的相应接触角为81度。在没有甲基纤维素的情况下,TMCS上有高质量的运动,但玻璃/SiO₂上没有运动。这一观察结果与玻璃/SiO₂表面的接触角、HMM孵育浓度(30 - 150 μg mL⁻¹)以及测定溶液的离子强度(20 - 50 mM)无关。对于无图案以及微图案化和纳米图案化表面,都观察到了TMCS和SiO₂之间完全的运动选择性。对孵育过程中HMM消耗的分光光度分析、K/EDTA ATP酶测量以及HMM结合的全内反射荧光光谱分析表明,TMCS与SiO₂/玻璃之间的HMM表面密度仅存在微小差异。因此,两种表面化学性质之间的运动对比度似乎归因于HMM不同的结合模式以及SiO₂/玻璃上肌动蛋白结合的阻碍。

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验