Sridhar M, Liu J, Insana M F
Department of Biomedical Engineering, University of California, Davis, CA 95616, USA.
Phys Med Biol. 2007 May 7;52(9):2425-43. doi: 10.1088/0031-9155/52/9/007. Epub 2007 Apr 10.
Techniques are being developed to image viscoelastic features of soft tissues from time-varying strain. A compress-hold-release stress stimulus commonly used in creep-recovery measurements is applied to samples to form images of elastic strain and strain retardance times. While the intended application is diagnostic breast imaging, results in gelatin hydrogels are presented to demonstrate the techniques. The spatiotemporal behaviour of gelatin is described by linear viscoelastic theory formulated for polymeric solids. Measured creep responses of polymers are frequently modelled as sums of exponentials whose time constants describe the delay or retardation of the full strain response. We found the spectrum of retardation times tau to be continuous and bimodal, where the amplitude at each tau represents the relative number of molecular bonds with a given strength and conformation. Such spectra indicate that the molecular weight of the polymer fibres between bonding points is large. Imaging parameters are found by summarizing these complex spectral distributions at each location in the medium with a second-order Voigt rheological model. This simplification reduces the dimensionality of the data for selecting imaging parameters while preserving essential information on how the creeping deformation describes fluid flow and collagen matrix restructuring in the medium. The focus of this paper is on imaging parameter estimation from ultrasonic echo data, and how jitter from hand-held force applicators used for clinical applications propagate through the imaging chain to generate image noise.
正在开发从随时间变化的应变对软组织的粘弹性特征进行成像的技术。在蠕变恢复测量中常用的压缩-保持-释放应力刺激被应用于样本,以形成弹性应变和应变延迟时间的图像。虽然预期应用是乳腺诊断成像,但本文展示了在明胶水凝胶中的结果以证明这些技术。明胶的时空行为由针对聚合物固体制定的线性粘弹性理论描述。聚合物的测量蠕变响应通常被建模为指数之和,其时间常数描述了全应变响应的延迟或滞后。我们发现延迟时间τ的谱是连续且双峰的,其中每个τ处的幅度代表具有给定强度和构象的分子键的相对数量。这样的谱表明键合点之间聚合物纤维的分子量很大。通过使用二阶沃伊特流变模型总结介质中每个位置的这些复杂谱分布来找到成像参数。这种简化在保留关于蠕变变形如何描述介质中的流体流动和胶原基质重构的基本信息的同时,降低了用于选择成像参数的数据的维度。本文的重点是从超声回波数据估计成像参数,以及用于临床应用的手持式力施加器产生的抖动如何通过成像链传播以产生图像噪声。