Wong Wai Yin, Wong Man Sang
Department of Health Technolgy and Informatics, The Hong Kong Polytechnic University, Hong Kong SAR, Nil, Hong Kong.
Eur Spine J. 2008 May;17(5):743-53. doi: 10.1007/s00586-008-0586-0. Epub 2008 Jan 15.
Measurement of human posture and movement is an important area of research in the bioengineering and rehabilitation fields. Various attempts have been initiated for different clinical application goals, such as diagnosis of pathological posture and movements, assessment of pre- and post-treatment efficacy and comparison of different treatment protocols. Image-based methods for measurements of human posture and movements have been developed, such as the radiography, photogrammetry, optoelectric technique and video analysis. However, it is found that these methods are complicated to set up, time-consuming to operate and could only be applied in laboratory environments. This study introduced a method of using a posture monitoring system in estimating the spinal curvature changes during trunk movements on the sagittal and coronal planes and providing trunk posture monitoring during daily activities. The system consisted of three sensor modules, each with one tri-axial accelerometer and three uni-axial gyroscopes orthogonally aligned, and a digital data acquisition and feedback system. The accuracy of this system was tested with a motion analysis system (Vicon 370) in calibration with experimental setup and in trunk posture measurement with nine human subjects, and the performance of the posture monitoring system during daily activities with two human subjects was reported. The averaged root mean squared differences between the measurements of the system and motion analysis system were found to be < 1.5 degrees in dynamic calibration, and < 3.1 degrees for the sagittal plane and < or = 2.1 degrees for the coronal plane in estimation of the trunk posture change during trunk movements. The measurements of the system and the motion analysis system was highly correlated (> 0.999 for dynamic calibration and > 0.829 for estimation of spinal curvature change in domain planes of movement during flexion and lateral bending). With the sensing modules located on the upper trunk, mid-trunk and the pelvic levels, the inclination of trunk segment and the change of spinal curvature in trunk movements could be estimated. The posture information of five subjects was recorded at 30 s intervals during daily activity over a period of 3 days and 2 h a day. The preliminary results demonstrated that the subjects could improve their posture when feedback signals were provided. The posture monitoring system could be used for the purpose of posture monitoring during daily activity.
人体姿势和运动的测量是生物工程和康复领域的一个重要研究方向。针对不同的临床应用目标,已经开展了各种尝试,如病理性姿势和运动的诊断、治疗前后疗效的评估以及不同治疗方案的比较。已经开发出基于图像的人体姿势和运动测量方法,如X射线摄影、摄影测量、光电技术和视频分析。然而,人们发现这些方法设置复杂、操作耗时,并且只能在实验室环境中应用。本研究介绍了一种使用姿势监测系统来估计躯干在矢状面和冠状面上运动时脊柱曲率变化,并在日常活动中提供躯干姿势监测的方法。该系统由三个传感器模块组成,每个模块都有一个三轴加速度计和三个相互正交排列的单轴陀螺仪,以及一个数字数据采集和反馈系统。通过与运动分析系统(Vicon 370)在校准实验设置时以及对九名受试者进行躯干姿势测量时对该系统的准确性进行了测试,并报告了该姿势监测系统在两名受试者日常活动中的性能。在动态校准中,该系统与运动分析系统测量值之间的平均均方根差小于1.5度,在估计躯干运动过程中躯干姿势变化时,矢状面小于3.1度,冠状面小于或等于2.1度。该系统与运动分析系统的测量值高度相关(动态校准中大于0.999,在屈伸和侧弯运动域平面中估计脊柱曲率变化时大于0.829)。通过将传感模块放置在上躯干、中躯干和骨盆水平,可以估计躯干节段的倾斜度和躯干运动时脊柱曲率的变化。在为期3天、每天2小时的日常活动期间,每隔30秒记录5名受试者的姿势信息。初步结果表明,当提供反馈信号时,受试者可以改善他们的姿势。该姿势监测系统可用于日常活动中的姿势监测。