Quality Control of Portal Imaging with PTW EPID QC PHANTOM.

PURPOSE

Quality assurance (QA) and quality control (QC) of different electronic portal imaging devices (EPID) and portal images with the PTW EPID QC PHANTOM.

MATERIAL AND METHODS

Characteristic properties of images of different file formats were measured on Siemens OptiVue500aSi, Siemens BeamView Plus, Elekta iView, and Varian PortalVision and analyzed with the epidSoft 2.0 program in four radiation therapy centers. The portal images were taken with Kodak X-OMAT V and the Kodak Portal Localisation ReadyPack films and evaluated with the same program.

RESULTS

The optimal exposition both for EPIDs and portal films of different kind was determined. For double exposition, the 2+1 MU values can be recommended in the case of Siemens OptiVue500aSi Elekta iView and Kodak Portal Localisation ReadyPack films, while for Siemens BeamView Plus, Varian PortalVision and Kodak X-OMAT V film 7+7 MU is recommended.

CONCLUSION

The PTW EPID QC PHANTOM can be used not only for amorphous silicon EPIDs but also for images taken with a video-based system or by using an ionization chamber matrix or for portal film. For analysis of QC tests, a standardized format (used at the acceptance test) should be applied, as the results are dependent on the file format used.