Shen D K, Gu S
Energy Technology Research Group, School of Engineering Science, University of Southampton, Highfield, Southampton SO17 1BJ, United Kingdom.
Bioresour Technol. 2009 Dec;100(24):6496-504. doi: 10.1016/j.biortech.2009.06.095. Epub 2009 Jul 21.
Experiment is performed to investigate the mechanism of the cellulose pyrolysis and the formation of the main products. The evolution of the gaseous products is examined by the 3-D FTIR spectrogram at the heating rate of 5-60 K/min. A pyrolysis unit, composed of fluidized bed reactor, carbon filter, vapour condensing system and gas storage, is employed to investigate the products of the cellulose pyrolysis under different temperatures (430-730 degrees C) and residence time (0.44-1.32 s). The composition in the bio-oil is characterized by GC-MS while the gases sample is analyzed by GC. The effects of temperature and residence time on the main products in bio-oil (LG, 5-HMF, FF, HAA, HA and PA) are examined thoroughly. Furthermore the possible routes for the formation of the products are developed from the direct conversion of cellulose molecules and the secondary reactions of the fragments. It is found that the formation of CO is enhanced with elevated temperature and residence time, while slight change is observed for the yield of CO(2).
进行实验以研究纤维素热解的机理和主要产物的形成。通过三维傅里叶变换红外光谱图在5 - 60 K/分钟的升温速率下研究气态产物的演变。采用由流化床反应器、碳过滤器、蒸汽冷凝系统和储气装置组成的热解装置,研究在不同温度(430 - 730摄氏度)和停留时间(0.44 - 1.32秒)下纤维素热解的产物。生物油中的成分通过气相色谱 - 质谱联用仪进行表征,而气体样品通过气相色谱进行分析。深入研究了温度和停留时间对生物油中主要产物(LG、5 - HMF、FF、HAA、HA和PA)的影响。此外,从纤维素分子的直接转化和碎片的二次反应出发,推导了产物形成的可能途径。结果发现,随着温度和停留时间的升高,CO的形成增加,而CO₂的产率变化不大。