Corrosion and Protection Centre, School of Materials, The University of Manchester, Manchester M60 1QD, United Kingdom.
J Biomed Mater Res A. 2010 Jul;94(1):38-46. doi: 10.1002/jbm.a.32664.
Titania-based coatings produced by plasma electrolytic oxidation are being investigated as bioactive surfaces for titanium implants. In this study, plasma electrolytic oxidation was performed in calcium- and phosphorus-based electrolytes under DC conditions, resulting in coatings of thickness of approximately 8-15 mum. Coating morphologies, microstructures, and compositions were examined by scanning electron microscopy with energy-dispersive X-ray analysis, X-ray diffraction, and electron probe microanalysis. The coatings revealed a cratered morphology, with incorporated calcium and phosphorus species. Proliferation rates of primary human osteoblasts cells on the coatings were up to approximately 37% faster than those for uncoated titanium and 316L stainless steel reference materials. Further, the coatings assisted cell adhesion and generation and anchorage of collagen. The amount of collagen was upto approximately 2.4 times greater than for the reference substrates. (c) 2010 Wiley Periodicals, Inc. J Biomed Mater Res, 2010.
基于钛酸钠的涂层通过等离子体电解氧化生成,被认为是钛植入物的生物活性表面。在这项研究中,钙和磷基电解液在直流条件下进行等离子体电解氧化,得到约 8-15 微米厚的涂层。通过扫描电子显微镜和能谱分析、X 射线衍射和电子探针微分析对涂层的形貌、微观结构和成分进行了研究。涂层呈现出有坑洼的形态,其中包含钙和磷物质。与未涂层的钛和 316L 不锈钢参考材料相比,原代人成骨细胞在涂层上的增殖速度最多可提高约 37%。此外,涂层还辅助细胞黏附,生成和锚定胶原蛋白。胶原蛋白的含量比参考基底高出约 2.4 倍。(c)2010 年 Wiley 期刊,生物医学材料研究,2010 年。