Suppr超能文献

UV 光功能化对钛纳米形貌增强初始生物活性的影响。

Effects of UV photofunctionalization on the nanotopography enhanced initial bioactivity of titanium.

机构信息

The Jane and Jerry Weintraub Center for Reconstructive Biotechnology, Division of Advanced Prosthodontics, Biomaterials and Hospital Dentistry, UCLA School of Dentistry, Los Angeles, CA 90095-1668, USA.

出版信息

Acta Biomater. 2011 Oct;7(10):3679-91. doi: 10.1016/j.actbio.2011.06.022. Epub 2011 Jul 1.

Abstract

This study addresses the control of the biological capabilities of titanium through specific nanosurface features and its potential modulation by UV photofunctionalization. Rat bone marrow derived osteoblasts were cultured on titanium disks with micropits alone, micropits with 100 nm nodules, micropits with 300 nm nodules, or micropits with 500 nm nodules, with or without UV treatment. After a 24 h incubation protein adsorption, as well as the attachment, retention, and spread of osteoblasts were examined in correlation with the topographical parameters of the titanium substrates. Each of the biological events was governed by a different set of multiple surface topographical factors with a distinctive pattern of regulation. For instance, without UV treatment the protein adsorption and cell attachment capability of titanium substrates increased linearly with increasing average roughness (Ra) and surface area of titanium disks, but increased polynomially with increasing nanonodule diameter. The cell retention capability increased polynomially with increasing nanonodular diameter and Ra, but increased linearly with increasing surface area. Consequently, the micropits with 300 nm nodules created the most favorable environment for this initial osteoblast behavior and response. UV treatment of the nanonodular titanium surfaces resulted in considerable enhancement of all biological events. However, the pattern of UV-mediated enhancement was disproportionate; exponential and overriding effects were observed depending upon the biological event and topographical parameter. As an example of overriding enhancement, the cell retention capability, which fluctuated with changes in various topographical parameters, became invariably high after UV treatment. The present data provide a basis for understanding how to optimize nanostructures to create titanium surfaces with increased biological capabilities and uncover a novel advantage of UV photofunctionalization of titanium substrates that synergistically increases its nanotopography enhanced biological capabilities whereby most of the initial biological events of osteoblasts were overwhelmingly enhanced beyond a simple proportional increase.

摘要

本研究通过特定的纳米表面特征来控制钛的生物性能,并通过 UV 光功能化来潜在地调节其性能。将大鼠骨髓来源的成骨细胞培养在具有微坑的钛盘上,微坑单独存在,微坑上存在 100nm 结节,微坑上存在 300nm 结节或微坑上存在 500nm 结节,有无 UV 处理。经过 24 小时孵育后,检测蛋白质吸附以及成骨细胞的黏附、保留和铺展情况,并与钛基底的表面形貌参数相关联。每一个生物事件都由一组不同的多个表面形貌因素控制,具有独特的调控模式。例如,未经 UV 处理时,钛基底的蛋白质吸附和细胞黏附能力随平均粗糙度(Ra)和钛盘表面积的增加呈线性增加,但随纳米结节直径的增加呈多项式增加。细胞保留能力随纳米结节直径和 Ra 的增加呈多项式增加,但随表面积的增加呈线性增加。因此,具有 300nm 结节的微坑为初始成骨细胞行为和反应创造了最有利的环境。UV 处理纳米结节钛表面会显著增强所有生物事件。然而,UV 介导的增强模式不成比例;取决于生物事件和形貌参数,会观察到指数和主导效应。作为增强主导的一个例子,细胞保留能力随各种形貌参数的变化而波动,经 UV 处理后始终保持较高水平。本数据提供了一种理解如何优化纳米结构以创造具有增强生物学性能的钛表面的基础,并揭示了 UV 光功能化钛基底的一个新优势,即协同增强其纳米形貌增强的生物学性能,使成骨细胞的大多数初始生物学事件都得到了极大的增强,超出了简单的比例增加。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验