Department of Food Science and Engineering, College of Agriculture and Natural Resources, University of Tehran, P.O. Box 4111, Karaj 31587-77871, Iran.
J Biosci Bioeng. 2012 Feb;113(2):211-9. doi: 10.1016/j.jbiosc.2011.10.002. Epub 2011 Oct 28.
An extensive investigation was conducted to isolate indigenous bacterial strains with outstanding performance for biosurfactant production from different types of spoiled fruits, food-related products and food processing industries. An isolate was selected from 800 by the highest biosurfactant yield in soybean oil medium and it was identified by 16S rRNA and the two most relevant hypervariable regions of this gene; V3 and V6 as Pseudomonas aeruginosa MA01. The isolate was able to produce 12 g/l of a glycolipid-type biosurfactant and generally less efficient to emulsify vegetable oils compared to hydrocarbons and could emulsify corn and coconut oils more than 50%. However, emulsification index (E(24)) of different hydrocarbons including hexane, toluene, xylene, brake oil, kerosene and hexadecane was between 55.8% and 100%. The surface tension of pure water decreased gradually with increasing biosurfactant concentration to 32.5 mNm(-1) with critical micelle concentration (CMC) value of 10.1mg/l. Among all carbon substrates examined, vegetable oils were the most effective on biosurfactant production. Two glycolipid fractions were purified from the biosurfactant crude extracts, and FTIR and ES-MS were used to determine the structure of these compounds. The analysis indicated the presence of three major monorhamnolipid species: R(1)C(10)C(10), R(1)C(10)C(12:1), and R(1)C(10)C(12); as well as another three major dirhamnolipid species: R(2)C(10)C(10), R(2)C(10)C(12:1), and R(2)C(10)C(12). The strain sweep experiment for measuring the linear viscoelastic of biosurfactant showed that typical behavior characteristics of a weak viscoelastic gel, with storage modulus greater than loss modulus at all frequencies examined, both showing some frequency dependence.
从不同类型的变质水果、食品相关产品和食品加工工业中,进行了广泛的调查,以分离具有出色生物表面活性剂生产性能的本土细菌菌株。通过在大豆油培养基中产量最高的生物表面活性剂,从 800 个分离物中选择了一个分离物,通过 16S rRNA 和该基因的两个最相关的高变区 V3 和 V6 鉴定为铜绿假单胞菌 MA01。该分离物能够生产 12g/L 的糖脂型生物表面活性剂,与烃类相比,通常对植物油的乳化效率较低,但能够乳化玉米和椰子油超过 50%。然而,不同烃类的乳化指数(E(24))包括己烷、甲苯、二甲苯、刹车油、煤油和十六烷在 55.8%至 100%之间。随着生物表面活性剂浓度的增加,纯水的表面张力逐渐降低,达到 32.5mNm(-1),临界胶束浓度(CMC)值为 10.1mg/l。在所检查的所有碳底物中,植物油是生物表面活性剂生产的最有效底物。从生物表面活性剂粗提取物中纯化出两种糖脂馏分,并使用 FTIR 和 ES-MS 确定这些化合物的结构。分析表明存在三种主要的单鼠李糖脂:R(1)C(10)C(10)、R(1)C(10)C(12:1)和 R(1)C(10)C(12);以及另外三种主要的二鼠李糖脂:R(2)C(10)C(10)、R(2)C(10)C(12:1)和 R(2)C(10)C(12)。用于测量生物表面活性剂线性粘弹性的应变扫描实验表明,具有弱粘弹性凝胶的典型行为特征,在所有检查频率下,储能模量均大于损耗模量,两者均表现出一定的频率依赖性。