Ding Kai, Cao Kunlin, Fuld Matthew K, Du Kaifang, Christensen Gary E, Hoffman Eric A, Reinhardt Joseph M
Department of Biomedical Engineering, The University of Iowa, Iowa City, Iowa 52242, USA.
Med Phys. 2012 Aug;39(8):5084-98. doi: 10.1118/1.4736808.
Regional lung volume change as a function of lung inflation serves as an index of parenchymal and airway status as well as an index of regional ventilation and can be used to detect pathologic changes over time. In this paper, the authors propose a new regional measure of lung mechanics-the specific air volume change by corrected Jacobian. The authors compare this new measure, along with two existing registration based measures of lung ventilation, to a regional ventilation measurement derived from xenon-CT (Xe-CT) imaging.
4DCT and Xe-CT datasets from four adult sheep are used in this study. Nonlinear, 3D image registration is applied to register an image acquired near end inspiration to an image acquired near end expiration. Approximately 200 annotated anatomical points are used as landmarks to evaluate registration accuracy. Three different registration based measures of regional lung mechanics are derived and compared: the specific air volume change calculated from the Jacobian (SAJ); the specific air volume change calculated by the corrected Jacobian (SACJ); and the specific air volume change by intensity change (SAI). The authors show that the commonly used SAI measure can be derived from the direct SAJ measure by using the air-tissue mixture model and assuming there is no tissue volume change between the end inspiration and end expiration datasets. All three ventilation measures are evaluated by comparing to Xe-CT estimates of regional ventilation.
After registration, the mean registration error is on the order of 1 mm. For cubical regions of interest (ROIs) in cubes with size 20 mm × 20 mm × 20 mm, the SAJ and SACJ measures show significantly higher correlation (linear regression, average r(2) = 0.75 and r(2) = 0.82) with the Xe-CT based measure of specific ventilation (sV) than the SAI measure. For ROIs in slabs along the ventral-dorsal vertical direction with size of 150 mm × 8 mm × 40 mm, the SAJ, SACJ, and SAI all show high correlation (linear regression, average r(2) = 0.88, r(2) = 0.92, and r(2) = 0.87) with the Xe-CT based sV without significant differences when comparing between the three methods. The authors demonstrate a linear relationship between the difference of specific air volume change and difference of tissue volume in all four animals (linear regression, average r(2) = 0.86).
Given a deformation field by an image registration algorithm, significant differences between the SAJ, SACJ, and SAI measures were found at a regional level compared to the Xe-CT sV in four sheep that were studied. The SACJ introduced here, provides better correlations with Xe-CT based sV than the SAJ and SAI measures, thus providing an improved surrogate for regional ventilation.
作为肺膨胀函数的局部肺容积变化可作为实质和气道状态的指标以及局部通气的指标,并可用于检测随时间的病理变化。在本文中,作者提出了一种新的肺力学局部测量方法——经校正雅可比行列式的比空气容积变化。作者将这种新方法与两种现有的基于配准的肺通气测量方法,与从氙增强CT(Xe-CT)成像得出的局部通气测量值进行比较。
本研究使用了来自四只成年绵羊的4DCT和Xe-CT数据集。应用非线性三维图像配准将吸气末附近采集的图像与呼气末附近采集的图像进行配准。大约200个标注的解剖点用作地标来评估配准精度。推导并比较了三种基于配准的局部肺力学测量方法:从雅可比行列式计算的比空气容积变化(SAJ);经校正雅可比行列式计算的比空气容积变化(SACJ);以及强度变化比空气容积变化(SAI)。作者表明,常用的SAI测量方法可以通过使用气-组织混合模型并假设吸气末和呼气末数据集之间组织容积无变化,从直接的SAJ测量方法推导得出。通过与Xe-CT局部通气估计值比较来评估所有三种通气测量方法。
配准后,平均配准误差约为1毫米。对于边长为20毫米×20毫米×20毫米的立方体感兴趣区域(ROI),SAJ和SACJ测量方法与基于Xe-CT的比通气(sV)测量值的相关性(线性回归,平均r² = 0.75和r² = 0.82)显著高于SAI测量方法。对于沿腹-背垂直方向尺寸为150毫米×8毫米×40毫米的平板中的ROI,SAJ、SACJ和SAI与基于Xe-CT的sV均显示出高度相关性(线性回归,平均r² = 0.88、r² = 0.92和r² = 0.87),三种方法之间比较无显著差异。作者证明了在所有四只动物中比空气容积变化差异与组织容积差异之间存在线性关系(线性回归,平均r² = 0.86)。
在通过图像配准算法得到的变形场的情况下,在所研究的四只绵羊中,与Xe-CT的sV相比,在局部水平上发现SAJ、SACJ和SAI测量方法之间存在显著差异。本文引入的SACJ与基于Xe-CT的sV的相关性优于SAJ和SAI测量方法,从而为局部通气提供了一种改进的替代指标。